Panasonic DMR-EA38V warranty ,  to select Setup, then , Press, ,  to select Quick Start, then

Off Timer

Select how long the unit remains on when it is not being used. Perform step 1 of “Accessing the Setup Menu” ( 52).

,  to select “Setup”, then 

,  to select “Off Timer”, then OK

,  to select “2 Hours”, “6 Hours” or “Off”, then OK

Remote Control

Use this function to synchronize the codes for the remote control and the main unit.

Perform step 1 of “Accessing the Setup Menu” ( 52).

,  to select “Setup”, then 

, to select “Remote Control”, then OK

,  to select “Set Code 1”, “Set Code 2”, or “Set Code 3” then

OK to set.

While pressing and holding OK	, press
and hold the numbered button	1 , 2 ,

or 3 corresponding to the code set in step 4 for about 5 seconds to set.

OK to complete.

Clock Settings

Perform step 1 of “Accessing the Setup Menu” ( 52).

,  to select “Setup”, then 

,  to select “Clock Settings”, then OK

Set Clock Manually

After selecting “Clock Settings” ( above, step 3).

,  to select “Set Clock Manually”, then OK

,  to select the item you want to change.

,  to change the setting.

–Repeat steps 5–6 to change other items.

OK

to confi rm new date and time and to initiate the clock.

Set the time change dates for DST

Set the beginning and end dates for DST. ( 12).

Quick Start

One Sec. Quick Start for Recording on DVD-RAM. From the power off state, recording on DVD-RAM starts about one second after

first pressing the [ DVD/VHS POWER] and then sequentially pressing [REC] (Quick Start Mode). Power consumption is also higher when the unit is turned off if this is set to “On”.

Perform step 1 of “Accessing the Setup Menu” ( 52).

,  to select “Setup”, then 

	Menus
,  to select “Quick Start”, then	Setting
OK

,  to select “On” or “Off”, then

OK

Restore Default Settings

This returns Setup menus to default settings, except for the clock, ratings level, closed caption, and on-screen language.

Perform step 1 of “Accessing the Setup Menu” ( 52).

,  to select “Setup”, then 

,  to select “Restore Default Settings”, then OK

,  to select “Yes” or “No”, then OK

53

RQT9058