Panasonic DMR-EA38V warranty Sound

Playback Issues	Sound		Page
No sound.		 Check the connections and the “Digital Audio Output” settings. Check the	56, 65
Low volume.		input mode on the amplifier if you have connected one.
Distorted sound.		 Check audio/video (AV) cables.	8
Cannot hear the desired
		 Check if TV is muted.	−
audio type.
		 Check if amplifier is muted.	−
		 Press [AUDIO] to select the audio.	29, 35
		 Sound is not output while fast-forwarding during chasing playback and	−
		simultaneous record and playback.
		 Set “V. Surround Sound” in the Audio menu to “Off” in the following cases:	51
		– When using discs that do not have surround sound effects, such as
		Karaoke discs
		– When playing multilingual broadcast recordings
		 The sound effects will not work when the bitstream signal is output from the	−
		HDMI AV OUT terminal or the DIGITAL AUDIO OUT terminal.
		 Audio may not be heard when more than 4 devices are connected with	−
		HDMI cables. Reduce the number of connected devices.
		 When the DIGITAL AUDIO OUT terminal is used for audio output and the	60
		unit is connected to the television with an HDMI cable, set “HDMI Audio
		Output” to “Off” in the Setup menu.
		 Depending on the connected equipment, the sound may be distorted if this	−
		unit is connected with an HDMI cable.
Cannot switch audio.		 If you want to switch between the main audio or SAP audio, then output	21
		both audio signals from the external equipment connected to this unit and
		record the program on a DVD-RAM or Video tape.
		 You have used a digital connection. Set “Dolby Digital” to “PCM” or connect	56, 65
		using an audio cable (analog connection).
		 There are discs whose audio cannot be changed due to how the disc was	−
		created.

Reference

79

RQT9058