Panasonic DMR-EA38V warranty ,  to select Test, then OK

STB (Set Top Box) IR Settings

Completed testing all of the % codes.

Do you want to start over the test again?

Yes, start over again

No, exit

OK

STB (Set Top Box) IR Settings:	STB (Set Top Box) IR Settings
	Set Top Box.
,  to select an item,	Please choose settings based on your
	STB (Set Top Box) Type	Cable Box/DVR
then OK	Brand Name	ABC
	Max. CH digits	3 Digit
	OK Key Operatin	Off
STB (Set Top Box) Type	Test
	OK

–Select the service being used.

Brand Name

–Select the set top box brand.

You can also use [] or [] to view other pages.

Max. CH digits

–Select the maximum number of channel digits to be entered in your set top box［. This must not be selected when “Converter Box” is selected for “STB (Set Top Box) Type”.］

OK Key Operation

–Select whether or not the selected channel is confi rmed by pressing OK in accordance with your set top box.

,  to select “Test”, then OK

– Confi rmation screen appears.

OK

Tips

To return to the previous screen

Press [RETURN].

Getting Started

The correct operation of the Set Top Box Control cable is checked. Enter a channel that can be received by your set top box.

, to select a position in which the channel is entered and ,  to set the number, then OK

– You can also use numbered buttons.

STB (Set Top Box) IR Settings

Start Set Top Box Control testing. Please input the channel number for testing. Use either numbered buttons or UP/DOWN Cursors.

Channel : 1 0

STB Type : Cable Box/DVR

Brand Name : Panasonic

Max. CH digits : 4 Digit

OK Key Operation : On

IR Code : OO

OK	Number
	0 --

Confi rmation screen appears.	STB (Set Top Box) IR Settings
	Has the STB channel changed the number you
	Completed testing the / IR codes.
,  to select the item,	selected? Please select from the following:
	recommended to try several channels.
		Note : “Yes, try other channels” is
then OK		Yes, try other channels
		Yes, complete setup
		No, try another code
Yes, try other channels			IR Code : OO
			OK

–Even if this unit can select a channel

on the set top box, it is recommended to select “Yes, try other channels” and verify whether or not other channels can be

selected and properly controlled. ( Step 8)

Yes, complete setup

–Exits the Set Top Box Control setting screen.

No, try another code

– Select this option when there are channels that cannot be selected.

If channels cannot be selected as set,

then “Yes, start over again” or “No, exit” will be displayed.

“Yes, start over again” : Returns to Step 6. Set the channels again.

“No, exit” : The set top box is not controlled with this unit.

If any channel cannot be selected, then this unit cannot properly control the set top box.

11

RQT9058