Panasonic DMR-EA38V Play Press and hold, To select the audio, ,  to select the time, then

Quick View (Play 1.3)

[RAM]

Allows you to increase the play speed slightly without distorting the audio.

During playback

PLAY (Press and hold.)

– Press again to return to normal speed.

Slow-motion Play

[RAM] [-R] [-R\DL] [-RW‹V›] [+R] [+R]DL] [+RW] [DVD-V] [-RW‹VR›]

While paused

or

–There are 5 slow-motion speeds. Each press increases the speed.

–Press [ PLAY] to restart normal playback.

Notes

If continued for approx. 5 minutes, slow-motion play pauses automatically (except [DVD-V]).

Frame-by-Frame Viewing

[RAM] [-R] [-R\DL] [-RW‹V›] [+R] [+R]DL] [+RW] [DVD-V] [-RW‹VR›]

While paused

OK

–Each press shows the next or previous frame.

–Press and hold to advance or reverse frame-by- frame in succession.

–Press [ PLAY] to restart normal playback.

Time Slip

[RAM] [-R] [-R\DL] [-RW‹V›] [+R] [+R]DL] [+RW] [-RW‹VR›] Use to skip in 1-minute or 10-minute increments.

During playback

TIME SLIP

CM Skip

[RAM] [-R] [-R\DL] [-RW‹V›] [+R] [+R]DL] [+RW] [-RW‹VR›] Skips 1-minute forward with each press.

During playback

CM SKIP

Create Chapters

[RAM]

During playback

CREATEFeatures

CHAPTER

Advanced

Tips

You can skip to the start of a chapter by pressing [, ].

Tips

Depending on the disc, some operations may not be possible.

Changing Audio during Playback

AUDIO

Ato select the audio.

Available audio will differ based on disc type.

See below.

	e.g.: [RAM]	DVD-RAM
[RAM] [-RW‹VR›]	“Stereo” is		Play
Stereo  Mono L  Mono R	selected.
			Stereo


[RAM] [-RW‹VR›]When playing a multilingual broadcast, you can choose between Main Audio and SAP Audio.

Main Audio  SAP Audio

[DVD-V\

This allows you to change items like the audio channel number and the soundtrack language ( 50).

Soundtrack 1 ENG

e.g., English is the selected language.

,  to select the time, then

OK

–Each press of  or  advances the interval by 1 minute (press and hold for 10-minute intervals).

Notes

If you cannot change the audio type when you have used only an optical digital audio cable for connection, set “Dolby Digital” to “PCM” ( 56). Alternatively, you may connect to an amplifi er or system component with an audio cable and change the input on the amplifi er or system component to suit the connection ( 65).

29

RQT9058