Panasonic DMR-EA38V warranty ,  to select Hdmi Priority, then OK, Functions of Hdmi

Functions of HDMI

Perform step 1 of “Accessing the Setup Menu” ( 52).

,  to select “TV Screen”, then



,  to select “Functions of HDMI”, then OK

HDMI Priority

After selecting “Functions of HDMI” ( above, step 3).

,  to select “HDMI Priority”, then OK

24p Output for DVD-Video

When this unit is connected to a TV supporting 1080/24p output via an HDMI cable, this unit displays each frame at 1/24 second intervals – the same interval originally shot with the fi lm camera.

After selecting “Functions of HDMI” ( left, step 3).

,  to select “24p Output for DVD-Video”, then OK

,  to select “On” or “Off”, then

	OK
[On]	Set to “On” and then set the Progressive/24p in the
	Video Menu in the On-screen Menu ( 51) to “24p”.
	When the video is being output in 24 frames per
	second, no video is output from a video terminal other
	than the HDMI terminal.

,  to select “On” or “Off”, then

HDMI Output Display Aspect

OK

[Off] When connecting equipment such as an amplifi er with an HDMI cable, and connecting TV (compatible with progressive video) with a Component Video Cable

HDMI Resolution

You can only select items compatible with the connected

equipment. This setting normally does not need to be changed. However if you are concerned about output picture quality, it may be improved by changing the setting.

To enjoy High Quality Video up-converted to 1080p, you need to connect the unit directly to a 1080p–compatible HDTV. If this unit is connected to an HDTV through other equipment, it must also be 1080p compatible.

After selecting “Functions of HDMI” ( above, step 3).

,  to select “HDMI Resolution”, then OK

,  to select the item, then

	OK
[Auto]	Automatically selects the output resolution best
	suited to the connected television (1080p, 1080i,
	720p or 480p).

[480i]

[480p]

[720p]

[1080i]

[1080p] When setting video output to “1080p”, we recommend using a Panasonic HIGH SPEED HDMI cable to prevent video distortion.

Settings used when 4:3 aspect video is output on the television as 16:9 aspect.

After selecting “Functions of HDMI” ( left, step 3).

,  to select “HDMI Output Display Aspect”, then OK

	,  to select “Full” or “Normal”,	Menus
		Setting
	then OK
[Full]	Video output is enlarged to match the screen size.
[Normal]	Video is output as 4:3 aspect. Side panels (black
	bars on the left and right) will appear on the
	screen.

Notes

Depending on the equipment to connect, some items may be shaded in gray on the display and cannot be selected, or changing settings may be unavailable.

Above items can be set when you set “HDMI Priority” to “On”.

59

RQT9058