Copying Recordings (DVD VHS)

All recordings on the disc are automatically copied onto the tape.

If you start copying when the resume function is activated, the DVD is copied from the beginning of the recording where you previously stopped. To copy a whole disc, press [STOP] to deactivate it before copying ( 14).

[RAM] [-R] [-R]DL] [-RW‹V›] [-RW‹VR›] [+R] [+R]DL] [+RW] [VHS] Finalized discs or DVD-Video cannot be copied on this unit.

Preparation:

Turn on the television and select the appropriate video input to suit the connections to this unit (example: AV input, etc.).

[VHS] Ensure accidental erasure tab is intact ( 13).

Insert a VHS tape with enough space for recording. Stop the tape at the point where you want to start copying to.

Select the VHS recording mode ( 22).

Set “HDMI Output Display Aspect” to “Full” ( 59). (The default setting is “Full”.)

Insert the disc containing the recording to be copied.

On the main unit

Press and hold for about 3 seconds.

COPYING

− COPY will appear in the unit’s display when the

 

 

copying process begins.

 

− Copying automatically stops when playback of the

 

disc fi nishes or the tape reaches its end.

Tips

Additional navigation

You can begin the same kind of copy by using COPY Navigator. Use the operations listed below instead of step shown above.

1.Press [FUNCTIONS].

2.Press [, ] to select “Copy” then press [OK]. Copy Navigator screen appears.

3.Press [, ] to select “DVD to VHS” then press [OK].

When you start copying from the selected recording

1.Press [DRIVE SELECT] to select the DVD drive.

2.Press [DIRECT NAVIGATOR].

[RAM] When the Album View screen is displayed, press [A] to switch to the Recordings screen.

3.Press [, , , ] to select the recording you want to start, then press [OK].

4. Go to step of “Copying Recordings (DVD VHS)” shown above.

Index signals are automatically recorded on the tape according to the division of recordings on the DVD [ 34, VHS Index Search System (VISS)].

To cancel copying in the middle

Press [STOP].

You can also press and hold [RETURN] for about 3 or more seconds to cancel copying in the middle.

INPUT SELECT

REC MODE

REC

 

 

COPYING

Tips

Operations

COPYING indicator

 

discs. Refer to pages 66 and 67.

Basic

Icons such as “ [RAM] ” indicate usable

 

 

 

Notes

When copying doesn’t start, the “COPYING” indicator on the main unit blinks for about 7 seconds. Check if the unit is properly prepared.

19

RQT9058

Page 19
Image 19
Panasonic DMR-EA38V warranty Press and hold for about 3 seconds, Copying Recordings DVD VHS