Dear Panasonic Customer:
This instruction booklet provides all the necessary operating information that you might require. We hope it will help you to get the most out of your new product, and that you will be pleased with your Panasonic LCD projector.
The serial number of your product may be found on its bottom. You should note it in the space provided below and retain this booklet in case service is required.
Model number:
Serial number:
IMPORTANT SAFETY NOTICE
WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE.
Power Supply: This LCD Projector is designed to operate on 100 V – 240 V, 50 Hz/60 Hz AC, house current only.
CAUTION: The AC power cord which is supplied with the projector as an accessory can only be used for power supplies up to 125 V, 7 A. If you need to use higher voltages or currents than this, you will need to obtain a separate 250 V power cord. If you use the accessory cord in such situations, fire may result.
The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the product.
CAUTION:
This equipment is equipped with a |
|
plug. Do not remove the grounding pin on the power plug. This |
|
plug will only fit a |
|
feature. If you are unable to insert the plug into the outlet, contact | Do not remove |
an electrician. Do not defeat the purpose of the grounding plug. |
|
|
| Preparation | |
WARNING: | |||
| |||
This equipment has been tested and found to comply with the limits for a Class B digital |
| ||
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide |
| ||
reasonable protection against harmful interference in a residential installation. This |
| ||
equipment generates, uses, and can radiate radio frequency energy and, if not installed and |
| ||
used in accordance with the instructions, may cause harmful interference to radio |
| ||
communications. However, there is no guarantee that interference will not occur in a |
| ||
particular installation. If this equipment does cause harmful interference to radio or |
| ||
television reception, which can be determined by turning the equipment off and on, the user |
| ||
is encouraged to try to correct the interference by one or more of the following measures: |
| ||
–Reorient or relocate the receiving antenna.
–Increase the separation between the equipment and receiver.
–Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
–Consult the dealer or an experienced radio/TV technician for help.
FCC CAUTION: To assure continued compliance, use only shielded interface cables when connecting to computers or peripheral devices.
Any unauthorized changes or modifications to this equipment will void the users authority to operate.
WARNING:
BNot for use in a computer room as defined in the Standard for the Protection of Electronic Computer/Data Processing Equipment, ANSI/NFPA 75.
BFor permanently connected equipment, a readily accessible disconnect device shall be incorporated in the building installation wiring;
BFor pluggable equipment, the
| Declaration of Conformity |
Model Number: | |
Trade Name: | Panasonic |
Responsible party: | Matsushita Electric Corporation of America. |
Address: | One Panasonic Way Secaucus New Jersey 07094 |
Telephone number: | |
Email: | pbtsservice@panasonic.com |
This device complies with Part 15 of the FCC Rules, Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
