![](/images/new-backgrounds/1293666/293666227x1.webp)
SERIES3800/S120T
C-2 Installing Windows XP/2000/2003 for RAID Systems
Installing a New Operating
a. Insert Microsoft's Windows XP/2000/2003 Setup CD in the CD Driver, and the system will start booting up from CD.
b. Press the <F6> key when the
c. When the Windows XP/2000/2003 Setup screen appears, press "S" to specify additional device(s).
d. Insert the driver
e. Select the Intel(R)82801GR/GH SATA RAID Controller from the list indicated in the XP/2000/2003 Setup Screen, and press the <Enter> key.
f. Press the <Enter> key to continue the installation process. (If you need to specify any additional devices to be installed, do it at this time.) Once all devices are specified, press the <Enter> key to continue with the installation.
g. From the Windows XP/2000/2003 Setup screen, press the <Enter> key. The XP/2000/2003 Setup will automatically load all device files and then, continue the Windows XP/2000/2003 installation.
h. After the Windows XP/2000/2003 Installation is completed, the system will automatically reboot.
i. Insert the Supermicro Setup CD that came with the package into the CD Drive during system reboot, and the main screen will appear.
Note: the current version of the ICH9R SATA RAID Utility can only support the Windows XP/2000/2003 Operating System.