Furuno Sc 50 manual Flush mount S kit Type OP20-17, Code No

1. INSTALLATION
Flush mount “S”
Flush mount “S” kit		Type: OP20-17, Code No.: 000-040-720)
	Name		Type	Code No.	Qty
	Flush Mount Fixture		20-007-2401	100-183-190	2
	Wing Bolt		M4X30	000-804-799	4
	Wing Nut		M4	000-863-306	4
	Hex Bolt		M6X12	000-862-127	2
	Spring Washer		M6	000-864-260	2

1.Make a cutout in the mounting location. The dimensions are 167(W) x 92(H) mm.

2.Place the display unit in the cutout.

3.Fix the display unit to the two flush mount fixtures with hex bolts and spring washers.

4.Screw the butterfly nut on the butterfly bolt.

5.Fix the display unit with the butterfly bolt and then tighten the butterfly nut.

Flush mount “S”

1-16