Furuno Sc 50 manual Trip Menu, Trip menu

2. OPERATION

2.12TRIP Menu

The TRIP menu functions to

•Choose the indication to show on the SOG/STW display

•Choose source of distance run

•Reset distance run to zero

•Smooth the tide drift indication

•Enter smoothing for rate of turn and display range scale

1.Press the [MENU] key to display the main menu.

2.Choose TRIP MENU and then press the [ENT] key.

TRIP MENU

DISTANCE DISP : DSTNC

DISTANCE CALC: GPS

RESET DISTANCE?

DRIFT AVG : 10SEC

SMOOTH ROT: 2.5 SEC

ROT RANGE: 60￿/MIN

TRIP menu

3.Choose DISTANCE DISP and then press the [ENT] key.

4.Choose what to display on the Speed display; distance run (DSTNC) or tide direction and speed (DRIFT). Press the [ENT] key.

5.Choose DISTANCE CALC and then press the [ENT] key.

6.Choose the source for distance run; GPS, VLW (distance traveled through water) or VBW (Dual ground/water speed). (VLW requires DS-80 type Doppler speed log and VBW requires Current indicator or Doppler speed log.) Press the [ENT] key.

7.Choose DRIFT AVG. and then press the [ENT] key.

8.If tide current and speed data is unstable, enter a smoothing figure to stabilize the data. The higher the figure the more smoothed the data. A setting between 0 (no smoothing) and 9999 (seconds) is available.

9.Choose SMOOTH ROT and then press the [ENT] key.

10.Use the Omnipad to enter rate of turn smoothing rate. Choose location with ◄ or ►; change value with ▲ or ▼. The setting range is 0.1 to 30.0 (seconds).

11.Press the [ENT] key.

12.Choose ROT RANGE and the press the [ENT] key.

13.Choose the range of the ROT graph from among 30, 60 and 90 (degree/min.) and then press the [ENT] key.

14.Press the [DISP] key to close the menu.

2-21