Eagle Electronics 500CDF manual FasTrack

Page 71

To switch to Manual Depth Range:

1.First, turn off automatic depth range. From the Sonar Page, press

MENUto AUTO DEPTH RANGEENT.

2.Press to DEPTH RANGEENT and the Depth Range Control Scale appears.

3.Press or to select a different depth range. A horizontal black bar highlights the selected range.

4.When the new range is selected, press EXIT to clear the menu.

To turn Auto Depth Range on again:

From the Sonar Page, press MENUto AUTO DEPTH RANGEENTEXIT.

NOTE:

The sonar's depth capability depends on the transducer installa- tion, water and bottom conditions, and other factors.

FasTrack

This feature automatically converts all echoes to short horizontal lines on the display's far right side. The graph on the rest of the screen con- tinues to operate normally. FasTrack gives you a rapid update of condi- tions directly under the boat. This makes it useful for ice fishing, or when you're fishing at anchor. When the boat is not moving, fish sig- nals are long, drawn out lines on a normal chart display. FasTrack con- verts the graph to a vertical bar graph that, with practice, makes a use- ful addition to fishing at a stationary location.

65

Image 71
Contents Installation and Operation Instructions Page Table of Contents ColorLine level To turn Auto Sensitivity back on Page How this manual can get you out on the water, fast Read Me FirstPage Figuration and installation, bottom composi How Sonar Works How to Use this Manual Typographical Conventions Page Preparations Transducer InstallationSingle-frequency transom installations Pad Deadrise less than Strakes Good and poor transducer locations Transom Page Dot Alignment letters Positions Transducer Ratchets Bolt Transom Bottom Hull Flat-bottom hull Deep-vee hull Internal tooth washer TMB-S bracket Bolt Nut Flat washer Transducer mounted on trolling motor, side view Partial fish arches Hulls With Flotation Materials Transducer location High speed Trolling speed Page Epoxy transducer to hull Speed/Temperature Sensors Optional Speed Sensor Installation Good location Power Connections Power connections for the sonar unit Page Front 72.9 173.9 23.4 157.9 Millimeter 56.9 Inch In-Dash Template Face Cover Page Keyboard Basic Sonar OperationPower/lights on and off Main Menu Pages Pages Menu, showing Sonar display options Page Page Sonar Page, showing full sonar chart mode Basic Sonar Quick Reference Sonar Operations Page Page Important Tip Page Page Page ASP Advanced Signal Processing Sonar Options & Other FeaturesAlarms To adjust and turn on the shallow alarm To turn off the alarm, press ALARM↓ to Deep Alarm Enabledentexit Backlight Level Calibrate Speed Chart Speed ColorLine Thin or no ColorLine Wider ColorLine Depth Cursor ContrastDepth Range Manual Depth Range AutomaticFasTrack Fish I.D. Fish Symbols & Depths FishTrack Frequency Change Transducer Frequency SeaFinder CDF only Symbols with FishTrack depthsSonar Features menu with a frequency of 200 kHz selected Overlay Data HyperScrollNoise Rejection Page To return to the previous page, press Exit Tip Ping Speed & HyperScrollPage Pop-up Help Reset Options Set Keel Offset Reset Water DistanceScreen Contrast and Backlight Level Press MENUMENU↓ to SET Keel Offsetent Sensitivity & Auto Sensitivity Page Software Version Information Set LanguageSonar Page & Sonar Chart Display Options Sonar Chart ModePage Page Customizing the Digital Data/Chart Screen Sonar Simulator Stop Chart Surface Clarity Press ↓ or ↑ to select clarity levelEXITEXIT Units of Measure TransparencyZoom & Zoom Bar VolumeZoom Pan Troubleshooting Page Page Page Supplemental Material FCC Compliance Page Index Page Page 102 103 How to Obtain Service… Accessory Ordering Information for all countries Visit our web site