MEMORY
This unit has permanent memory that saves the following user settings when power is turned off: Units of Measure, Fish Alarm, Temp Size, Depth Size, Fish I.D. mode, Noise Reject mode, Display Contrast, Shallow and Deep alarms. It does not require, nor does it use an internal backup battery, so you never have to worry about replacement batteries.
MENUS
This unit uses menus to guide you through the various functions and features. Menu names and settings appear in the manual text as small capital letters like SENSITIVITY, which represents the Sensitivity menu.
The menu keys access these features, allowing you to customize the unit to your particular needs and water conditions. All you have to do to leave one menu and enter another is press MENU repeatedly. If you ever get lost in the menus, simply press the PWR key. This clears the menus from the screen.
Menus change depending on the mode the unit is in. Messages may appear in menu boxes or new menus can appear, depending on previous selections.
Menu
This screen shows a typical menu, the Scroll Speed menu.
DISPLAY – Opening Screen
The lights flash for about 20 seconds when the unit is turned on. The backlight menu first appears on the screen. To turn the lights on, press UP ARROW. If you don’t press a key, the menu will disappear after a few seconds. If you don't want to wait, press PWR to clear the menus from the screen.
When the sonar unit is first turned on and the backlight menu disappears, the display screen shows the Full Chart Page, or mode. The Fish I.D. fish symbol feature is off. The depth range shows on the
25