Sonar
Fish ID |
|
Displays fish echoes as fish symbols instead of |
|
fish arches with or without depth. This makes |
|
it easier to recognize fish on the sonar display. |
|
Symbols — places a fish symbol where a |
|
fish is detected. |
|
Depths — places depths above each fish |
|
detected; helps gauge the distance from each | Fish Symbols and Depths |
fish symbol to the boat. |
Both — turns on both Symbols and Depths.
To select a Fish ID option:
1.Highlight Fish ID and press Enter.
2.Select Symbols, Depths or Both and press ENTER.
Fish ID Beeps — sounds a tone when Fish ID detects a fish.
Measure Distance
Used to measure the distance from one location to another on the sonar display.
To Measure distance:
1.Move the cursor to the starting location.
2.Select Measure distance on the Sonar menu and press Enter.
3.Move the cursor to the second location. The Measure distance line will appear with the distance between the two locations shown in the cursor dialog box.
4.To measure another position, press Enter and move the cursor to the desired location.
Source
Allows you to select the sonar source for your unit. You can select your unit as the source, or choose another unit on your ethernet network, allowing you to share sonar returns from one unit with other units on the network.
31