Furuno FR-2125V Separating the control head, Display unit modification procedure

Separating the control head

The control head connects to the display unit with a connection cable, thus it can be located where desired, using the separate control head kit (option).

Separate type control head kit (Type: OP03-157, Code No.: 008-500-630)

Name	Type	Qty	Code No.	Remarks
Cable Assy.	UL2464SB20P/1P	1	000-140-812	10 m, 03S9422
Nonslip Rubber Feet	SJ-5003	4	000-801-787	With double-sided tape
Monitor Front Cover (V)	03-144-1731	1	100-274-560
KB Fixing Plate	03-144-1691	1	100-263-940
Handle Plate (V)	03-144-1732	1	100-274-570	For fixing handle
Dust Cover KB	03-144-1693	1	100-271-760
Upset Screw	M5X10 SUS 304	2	000-802-288
Binding Screw	M4X8 C2700	2	000-806-407

Display unit modification procedure

1.Raise the monitor unit and fix it with the stay. Refer to procedure for tabletop mounting on page 1-5.

2.Inside the display pedestal, unplug two connectors from the control head cable (P412 from MOTHER Board and J583) and unfasten two earth wires.

PTU COVER
J583	Control Head
	Cable
Earth Wire
J418
MB 03P9251
P412
INT
03P9252

Figure 1-12 Display unit, inside view

1-9