Furuno FR-2125V installation manual Display pedestal, front view

1.Open the monitor and fix it with the stay. See page 1-5 for instructions.

2.Fasten the M-card base assy. with one M4X8 pan-head screw as below.

Fasten with

M4 x 8 screws.

Fasten with M3 x 8 screws (2 pcs.)

Figure 4-12 Display unit, inside view

3.Fasten the ground wire with the M3X8 pan-head screw and M3 teethed lock washer.

4.Fix the M-card case assy. with two M3X8 pan-head screws.

5.Set the M-card case cover to the hole in the front panel and fix with two M2.6X5 pan-head screws.

	Pan-head screw B
Pan-head screw A	M4X8
	M-card base assy.
M3X8
Teethed lock washer
M3

					1
				2
			3
			4
		5
	6
7
8

8

1

Pan-head screw

M2.6X5, 2 pcs.

Pan-head screw B

Pull forwardM3X8, 2 pcs. and fix.

M-card case cover

Figure 4-13 Display pedestal, front view

4-13