SSK-3
2. Installation instructions
»
These installation instructions are intended for persons with skills in electrical and mechanical areas due to their training, ex- perience and received instructions.
Personnel using these installation instructions must be in- structed in the regulations for the prevention of accidents, the operating conditions and safety regulations and their implemen- tation.
Ensure in each case that the personnel are informed.
The installation instructions provided in the corresponding oper- ating instructions apply for all connected equipment.
Observe safety regulations with regard to lifting gear handling. All installation work must be carried out with the equipment dis- connected from electrical power and compressed air supply.
L
For installation work taking place at heights of over approx. 1828.8 mm (6 ft.), use only ladders or similar equipment and working platforms intended for this purpose. At greater heights, the proper equipment for protection against falling must be worn.
Use only suitable lifting gear which is in proper working order and load suspension devices with sufficient carrying capac- ity. Do not stand or work under suspended loads!
Use suitable workshop equipment
Install the equipment such that all parts are easily accessible; this facilitates maintenance and repair work.