Sterling SSk-3 operating instructions SSK-3

Page 21

SSK-3

Depressurize the compressed-air line to the hopper (only with compressed-air valve).

Disassemble the material line on the lateral inlet of the hopper.

Remove the connecting plug (B) “conveyor control” on the connection housing of the hopper.

Disassemble the hopper.

SM3-610

Maintenance 20

Image 21

Contents Sterling Material Processing SSK-3Telephone 800 Edition 12/97 Technical serviceSSK-3 Parts and Service Department Table of contents Safety instructions Safety instructionsSSK-3 Explanations and information For the safety of the equipment For your safetyInstallation instructions Set-up TransportSSK-3 Compressed-air supply only with compressed-air valves Electrical connection SSK-3 Functional description Functional descriptionMaintenance SSK-3 Maintenance intervals Disassembling the hopper SSK-3 Replace the sealing rings Nonreturn valve Outlet flap Adjust the flap switch Cleaning the hopper Spare parts list Spare parts listSSK-3 Dimension sheet Technical data