Hitachi series inverter manual C082 OI input span calibration

Func.				Default	Set
	Name / Description			Value
Code					Value
				–FE(F)/–FU
C031	Terminal [11] active state		• 00 Normally open	00
			(NO)
C032	Terminal [12] active state			00
			• 01 Normally
			closed (NC)
C036	Alarm relay terminal			01
	active state
C041	Overload level setting			Rated
				current of
				inverter
C042	Frequency arrival setting for accel			0.0
C043	Arrival frequency setting for decel			0.0
C044	PID deviation level setting			3.0
C052	PID FBV function high limit			100.0
C053	PID FBV function variable low limit			0.0
C071	Communication speed selection			06 / 04
	• 04 4800 bps
	• 05 9600 bps
	• 06 19200 bps
C072	Node allocation			1.
C074	Communication parity selection			00
	• 00 No parity
	• 01 Even parity
	• 02 Odd parity
C075	Communication stop bit selection			1
C076	Communication error select			02
	• 00 Trip (error code E60)
	• 01 Decelerate to stop and trip (error code E60)
	• 02 Disable
	• 03 Free run stop (coasting)
	• 04 Decelerate to a stop
C077	Communication error time-out			0.00
C078	Communication wait time			0.
C081	O input span calibration			100.0
C082	OI input span calibration			100.0
C085	Thermistor input tuning			100.0
C086	[AM] terminal offset tuning			0.0
C091	Debug mode enable			00
	• 00 Display	• 01 No display

25