WatchGuard Technologies Firebox X manual Specifying Report Sections, Click OK

Specifying Report Sections

5 Click OK.

Specifying Report Sections

You can select the information to show in the report using the Sections tab on the Report Properties dialog box.

1From Historical Reports, click the Sections tab.

2Select the check boxes for the sections to include in the report.

To see the contents of each section, refer to the “Report Sections and Consolidated Sections” on page 54.

3(Optional) Select the Authentication Resolution on IP addresses check box.

You must have user authentication enabled to create reports with resolution from IP address to user name. More time is necessary to create a report with resolution enabled.

4To use DNS resolution on the IP addresses, select the DNS Resolution on IP addresses check box.

Consolidating Report Sections

In the Sections tab you can select which information to include in a report. You can get:

•A vertical look at the data, on each of a group of Fireboxes

•A horizontal or cumulative look at the data, put together for a group of Fireboxes®.

50 WatchGuard System Manager