Index Interfurn 90-823226 Low Pressure Hose Control Valve-to-Cooler, Earlier Style Control Valve

Page 12

Low Pressure Hose

(Control Valve-to-Cooler)

REMOVAL

NOTE: Catch fluid that drains from hose, cooler and pump in a suitable container.

1.Loosen hose clamp and remove hose from fluid cooler.

c

b

a

72588

Port Side Mounted Fluid Cooler

a - Fluid Cooler

b - Hose Clamp

c - Hose

b

a

74752

Rear Mounted Fluid Cooler

a - Fluid Cooler

b - Hose

2.Remove hose where routed and secured across top of engine flywheel housing.

Index

a

72853

Port Side Mounted Fluid Cooler Only

a - J-Clamps

3.Remove large fitting from control valve at tran- som. Remove hose.

a

72026

Earlier Style Control Valve

a - Large Fitting

a

73786

Later Style Control Valve

a - Rear Fitting

8A-10 - POWER STEERING PUMP

90-823226--1 996

Image 12 Contents
Power Steering Table of Contents Torque Specifications PrecautionsTools/Sealants Power Steering Pump and Components Exploded View Serpentine Belt Routing Important Service Information Pump Pulley ReplacementTesting and Repair Checking Pump Fluid Level Belt AdjustmentSerpentine Belt Adjustment Filling and Air Bleeding SystemPump Assembly Mounting Bracket Hydraulic Hoses and Fluid CoolerHigh Pressure Hose Pump-to-Control Valve Earlier Style Control Valve Torque small fitting toLow Pressure Hose Cooler-to-Pump Port Side Mounted Fluid CoolerRear Mounted Fluid Cooler Loosen hose clamp and remove hose from back of pump Low Pressure Hose Control Valve-to-Cooler Port Side Mounted Fluid Cooler OnlyEarlier Style Control Valve Later Style Control ValveEarlier Style Control Valve Torque large fitting to Installing Reservoir Priority Valve Kit 79691A1 InformationReservoir Cap Vent Installing Priority Valve Install return hose large fitting on one end only Secure all hoses with Sta-Straps provided Maintenance Filling System with FluidSystem Flow Diagram Pressure Line Return Line Gravity Feed LinePower Steering 8A-19
Related manuals
Manual 21 pages 44.76 Kb