Index Interfurn 90-823226 manual Pump Assembly

Pump Assembly

IMPORTANT: Be careful to not cross-thread or over-tighten hose fittings.

1.Be certain a new high pressure hose O-ring is present, and install threaded fitting in back of pump assembly. Tighten fitting securely. Connect low pressure hose on back of pump. Tighten hose clamp securely.

b

c

a - Pump

b - Bracket

c- Threaded Fitting

d- Low Pressure Hose

Index

2.Install mounting hardware and fasteners to retain pump to bracket. (Refer to ªExploded Viewº for specific details on your engine.)

a

72849

a

b

c

72848

a- Screw With :Lockwasher

b- Nuts (With Hardware)

c- Spacers

3.Install drive belt and adjust tension. Refer to ªPump Drive Belt Adjustmentº as previously out- lined.

4.Fill and air bleed system. Refer to Section 1B - ªMaintenanceº (see ªTable of Contentsº).