Installing Priority Valve
NOTE: Priority valve mounting bracket can be used in various mounting configurations.
71403
1.Install priority valve mounting bracket.
a.Find a central location that will be accessible for making and checking hose connections. Ensure that location will allow 2 in. (51 mm) or more, above and below priority valve for hose connections and routing (preferably on a stringer near transom).
b.Mount bracket using lag bolts and washers supplied.
a
b
b
72859
a - Mounting Bracket
b - Lag Bolts and Washers
Index
NOTE: The 90° elbow locations on priority valve are marked with a ªTº stamped into the valve.
2.Apply liquid pipe joint sealer to threads and install fittings into priority valve.
b
a |
c
c | a |
71404
a- 90 Degree Elbow
b- Large Inverted Flare Fitting
c- Small Inverted Flare Fitting
3.Mount priority valve on bracket. Torque bolt to 120 lb. in. (14 N´m).
b
a
d
c
72860
a- Bolt and Washers
b- Washer and Nut (Not Shown In This View)
c- Bracket
d- Priority Valve