INSTALLATION
!CAUTION
Route hoses exactly as shown below. This will help avoid stress on the hose fittings and will help avoid kinks in the hoses.
IMPORTANT: Be careful to not
1.Thread large fitting into control valve. Position hose properly (as prior to removal).
Earlier Style Control Valve: Torque large fitting to
a
72026
a - Large Fitting
Later Style Control Valve: Torque fittings to 23 lb. ft. (31 N´m)
73786
2.Route hose along flywheel housing and secure with
Index
3.Using hose clamp, install hose on fluid cooler. Tighten clamp securely.
c
b
a
72588
Port Side Mounted Fluid Cooler
a - Fluid Cooler
b - Hose Clamp
c - Hose
b
a
74752
Rear Mounted Fluid Cooler
a - Fluid Cooler
b - Hose
4.Fill and air bleed system. Refer to Section 1B - ªMaintenanceº (see ªTable of Contentsº).
POWER STEERING - |