Graco 312497P important safety instructions MHH Series, Technical Data

Page 24

MHH Series

MHH Series

Technical Data

Material

Steel Body (corrosion protected) Steel Piston (honed fit)

Pressure (max)

7,500 psi (52 MPa, 517 bar) for Petroleum or Synthetic

 

Oil - fluoroelastomer O-rings

Lubricant

Petroleum or synthetic oil only

Maximum Operating Temperature

 

Fluoroelastomer O-rings (557722)

350°F (163°C)

Maximum Cycle Rate Without Cycle Pin

200 CPM

Net Weight (approx.)

 

3 section divider valve assembly

5.9 lbs (2.7 kg)

4 section divider valve assembly

7.3 lbs (3.3 kg)

5 section divider valve assembly

8.7 lbs (4.0 kg)

6 section divider valve assembly

10.2 lbs (4.6 kg)

7 section divider valve assembly

11.6 lbs (5.6 kg)

8 section divider valve assembly

13.0 lbs (5.9 kg)

Torque Ratings

 

Mounting Screw

8-9 ft. lbs (10.9-12.2 N.m)

Enclosure Plugs

6-8 ft. lbs (8.1-9.5 N.m)

Indicator Port Plug

5-7 ft. lbs (6.8-9.5 N.m)

Bleed Screws

1-2 ft. lbs. (1.4-2.7 N.m)

Tie Rod Nut

5-8 ft. lbs. (6.8-10.9 N.m)

24

312497P

Image 24
Contents Maximum Pressure Lube Points Pressure kPSIDivider Type SectionsEquipment Misuse Hazard Setup Pressure Relief ProcedureComponent Identification Typical Divider Valve CombinationsDivider Valves KeyPrefilling Lubricant Distributor Lines Filling Secondary-to-Lube Point LinesFilling Master-to-Secondary Lube Lines Filling Master Divider Valve Repair Section Air purging afterTI11098 TI11113 Purging Air from Pump to Master Divider Valve Lines Lube Point Secondary Master Disconnect Hand Pump Lube Point Secondary Master Remove Indicator Or Port Plug Performance Indicators Reset Indicator with MemoryRupture Indicator Automatic Relief Indicator4a. Master Divider Valve Equipped With Performance Indicator Assembly Torque ft-lbs N.m Torque Values *see ,Contamination Blockage Separation BlockageTechnical Data Dimensions MD SeriesParts Part No. DescriptionTechnical Data MJ SeriesRef Part No. Description MSP Series Crossport Plate Optional Parts MSP Series 312497P MHH Series Lube Outlet Inlet Typical Parts MXP Series /04 Ti11477 #2/33/0/24 0,!4% /04 Ref Part No. Description MGO Series 54,%43 $#!4/2 0/243 Parts MX Series v /54,%4 MX Series 312497P Accessories Rupture Indicator MH Divider Valves Only Rupture-to-Atmosphere Indicator Rupture-to-Atmosphere Indicator with Spud AssemblyCycle Indicators Rupture DiscsSingling and Crossporting Bar Assemblies Cycle Switches Cycle Counters Part NoPart Numbers Proximity Cycle Switches Description Type Part Number Pins SealProximity Switch Connection Cables Base Section Sub AssembliesConnection Cables for 312497P Graco Standard Warranty Graco Information