Accessories
Cycle Counters - Part No.: 563444
The purpose of a cycle counter is to give assurance that the lubricant is flowing thru the system. Every “count” indi- cates one complete cycle of the divider valve. Visual inspection and/or recording of counts provides a constant check on the performance of your lubricant system and the pump. The Cycle Counter can be used on any MJ, MS, MH, MX and MXP divider valve assembly.
Cycle Switches
The function of a Cycle Switch is to electrically give assurance that the lubricant is flowing through the system. Actu- ated by a cycle pin, the switch can be wired to various controls.
NOTE: The cycle switch MUST be attached to a section that is equipped with a cycle indicator pin.
Part Numbers
Series Flo Divider Valves | MJ | MS/MH | MS (Nickel) | MX |
| MXP | MGO |
|
|
|
|
|
|
|
|
Cycle Switch and Bracket Assembly | 563272 | 563272 | 563272 | 563272 |
| 563272 | 563269 |
Electrical Ratings: 15 amps at 125, 250 and 480 VAC; 1/2 amp at 125 VDC, 1/4 | |||||||
SPDT | amp at 250 VDC, 6.0 amp at 24 VDC |
|
| ||||
|
|
| |||||
Replacement Switch | 557781 | 557781 | 557781 | 557781 |
| 557781 | 557781 |
Cycle Switch and Bracket Assembly | 564357 | 564357 | 564537 | 564357 |
| 564537 | NA |
Electrical Ratings: 10 amps at 125 or 250 VAC; 0.3 amp at 125 VDC or 0.15 amp | |||||||
DPDT | at 250 VDC |
|
|
|
|
|
|
|
|
|
|
|
|
| |
Replacement Switch | NA | NA | NA | NA |
| NA | NA |
Replacement Bracket for either | 557546 | 557546 | 557546 | 557546 |
| 557546 | 560573 |
SPDT or DPDT Switch Assembly |
| ||||||
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
Moisture Resistant Cycle Switch | 563273 | 563273 | 563273 | 563273 |
| 563273 | NA |
with | Electrical Ratings: 5 amps at 125 or 250 VAC; Wire Code for Moisture Resistant | ||||||
Assembly SPDT | Switch: BK (Com), Red (N.C), WH (N.O.), GN (Ground) |
|
| ||||
Replacement Switch with | 557782 | 557782 | 557782 | 557782 |
| 557782 | NA |
Cable |
| ||||||
|
|
|
|
|
|
| |
40 | 312497P |