MAINTENANCE
NOTICE
Do not use excessive force when screwing the lamp to prevent lamp from breaking.
6.Secure lamp holder on top of the lamp.
7.Reinstall lamp guard.
8.Pull down balloon and zip the bottom zipper to cover lamp.
REPLACING BALLOON
1. Unzip the top and bottom of the balloon. See Figure 20.
3.Slide in the new replacement balloon over the top of the lamp guard assembly. See Figure 22.
INSTALL NEW
BALLOON
UNZIP TOP AND
BOTTOM ZIPPERS
BALLOON
Figure 20. Unzipping Balloon
2.Slide out the old or worn balloon over the top of the lamp guard assembly. See Figure 21.
REMOVE OLD
BALLOON
Figure 21. Removing Old Balloon
Figure 22. Replacing Balloon
4.Zip up the top and bottom of the new balloon. See Figure 23.
ZIP UP
NEW BALLOON
Figure 23. Zipping Up New Balloon
GB4000 BALLOON LIGHT• OPERATION AND PARTS MANUAL — REV. #1 (02/25/14) — PAGE 27