Graco 334014A Toxic Fluid or Fumes Hazard, Burn Hazard, Personal Protective Equipment

Page 7

Warnings

WARNING

TOXIC FLUID OR FUMES HAZARD

Toxic fluids or fumes can cause serious injury or death if splashed in the eyes or on skin, inhaled, or swallowed.

Read MSDSs to know the specific hazards of the fluids you are using.

Route exhaust away from work area. If diaphragm ruptures, fluid may be exhausted into the air.

Store hazardous fluid in approved containers, and dispose of it according to applicable guidelines.

BURN HAZARD

Equipment surfaces and fluid that’s heated can become very hot during operation. To avoid severe burns:

Do not touch hot fluid or equipment.

PERSONAL PROTECTIVE EQUIPMENT

Wear appropriate protective equipment when in the work area to help prevent serious injury, including eye injury, hearing loss, inhalation of toxic fumes, and burns. This protective equipment includes but is not limited to:

Protective eyewear, and hearing protection.

Respirators, protective clothing, and gloves as recommended by the fluid and solvent manufacturer.

334014A

7

Image 7
Contents Repair/Parts manual. Save these instructions Important Safety InstructionsRelated Manuals ContentsTo Specify the Configuration of a New Pump To Order Replacement PartsOrdering Information To Find Your Nearest DistributorConfiguration Number Matrix Pressurized Equipment Hazard Fire and Explosion HazardEquipment Misuse Hazard Plastic Parts Cleaning Solvent HazardThermal Expansion Hazard Burn Hazard Toxic Fluid or Fumes HazardPersonal Protective Equipment Grounding InstallationTighten Fasteners Before Setup MountingAir Line See Typical Floor Mount Installation,KEY Air Exhaust Ventilation1050HP Aluminum Manifolds Fluid Supply LineFluid Outlet Line Fluid Inlet and Outlet PortsTypical floor mount installation Typical Floor Mount InstallationHigh/Low Lever Pressure Relief ProcedureOperation Flush the Pump Before First UsePump Shutdown Start and Adjust the PumpTighten Threaded Connections MaintenanceMaintenance Schedule LubricationTorque Instructions Aluminum and SST Dimensions and MountingAluminum SSTAir Consumption Performance ChartsLow Pressure Setting Fluid Pressure How to Read the ChartsHigh Pressure Setting Technical Data Non-wetted external parts Fluid Temperature RangeFluid Temperature Range Wetted partsGraco Information Graco Standard Husky Pump Warranty