Section 2
Receiving & Installation
Receiving
The control is thoroughly tested at the factory and carefully packaged for shipment. When you receive your control, there are several things you should do immediately.
1.Observe the condition of the shipping container and report any damage immediately to the commercial carrier that delivered your control.
2.Verify that the part number of the control you received is the same as the part number listed on your purchase order.
3.If the control is to be stored for several weeks before use, be sure that it is stored in a location that conforms to published storage specifications.
Physical Location
The location of the control is important. It should be installed in an area that is protected from direct sunlight, corrosives, harmful gases or liquids, dust, metallic particles, and vibration. Exposure to these elements can reduce the operating life and degrade performance of the control.
Installation
Control Installation
Refer to the mounting dimensions and hole locations shown in Figure
Receiving & Installation