WARNING: | Be sure the system is properly grounded before |
applying power. Do not apply AC power before you ensure | |
that all grounding instructions have been followed. | |
Electrical shock can cause serious or fatal injury. | |
WARNING: | Do not remove cover for at least five (5) minutes |
after AC power is disconnected to allow capacitors to discharge. Dangerous voltages are present inside the equipment. Electrical shock can cause serious or fatal injury.
WARNING: Improper operation of control may cause violent motion of the motor shaft and driven equipment. Be certain that unexpected motor shaft movement will not cause injury to personnel or damage to equipment. Peak torque of several times the rated motor torque can occur during control failure.
WARNING: | Motor circuit may have high voltage present |
whenever AC power is applied, even when motor is not | |
rotating. Electrical shock can cause serious or fatal injury. | |
Caution: | To prevent equipment damage, be certain that the |
electrical service is not capable of delivering more than the | |
maximum line short circuit current amperes listed in the | |
appropriate control manual, 120 VAC maximum per control | |
rating. |
|
Caution: | Keep the average continuous DC current draw |
under 7 amperes, and make sure the motor is rotating. A stalled brushless DC motor can quickly overheat the control and/or the motor resulting in damage to either or both devices.