Depth Range - Automatic
When turned on for the first time, the bottom signal is automatically placed in the lower half of the screen. This is called Auto Ranging and is part of the automatic function. However, depending upon the bottom depth and the current range, you can change the range to a different depth. To do this:
1. From the Sonar Page, press MENU↓ to DEPTH RANGEENT.
At left, Sonar Page menu with Depth Range command selected. At
right, the Depth Range Control Scale.
2.The Depth Range Control Scale appears. Press ↑ or ↓ to select a dif- ferent depth range. A blue bar highlights the selected range. Range numbers in gray cannot be selected.
3.When the new range is selected, press EXIT to clear the menu.
Depth Range - Manual
You have complete control over the range when the unit is in the man- ual mode. There are 12 depth ranges, from 5 feet to 800 feet.
To switch to Manual Depth Range:
1.First, turn off automatic depth range. From the Sonar Page, press
MENU↓ to AUTO DEPTH RANGEENT.
2.Press ↑ to DEPTH RANGEENT and the Depth Range Control Scale appears.
3.Press ↓ or ↑ to select a different depth range. A horizontal blue bar highlights the selected range.
4.When the new range is selected, press EXIT to clear the menu.
To turn Auto Depth Range on again:
1. From the Sonar Page, press MENU↓ to AUTO DEPTH RANGEENTEXIT.
46