TC electronic SDN BHD M3000 Appendix Technical Specifications, To change without notice

Page 60

APPENDIX - TECHNICAL SPECIFICATIONS

Digital Inputs and Outputs

 

Connectors:

XLR (AES/EBU), RCA Phono (S/PDIF), Optical (Tos-link, ADAT)

Formats:

AES/EBU (24 bit), S/PDIF (24 bit), EIAJ CP-340, IEC 958, EIAJ Optical (Tos-link), ADAT Lite pipe

Output Dither:

HPF TPDF dither 8 to 24 bit

Sample Rates:

44.1 kHz, 48 kHz

Processing Delay:

0.2ms @ 48 kHz

Frequency Response DIO:

20 Hz to 23.9 kHz ± 0.01/-0.1 dB @ 48 kHz

Analog Inputs

 

Connectors:

XLR balanced (pin 2 hot)

Impedance:

20 kohm

Max. Input Level:

+22 dBu (balanced)

Min. Input Level (for 0 dBFS):

-10 dBu

Sensitivity:

@ 12 dB headroom: -22 dBu to +10 dBu

A to D Conversion:

24 bit (1 bit, 128 times oversampling)

A to D Delay:

0.8 ms @ 48 kHz

Dynamic Range:

>103 dB (unweighted), >106 dB (A)

THD:

-95 dB (0,0018 %) @ 1kHz, -6 dBFS (FS @ +16 dBu)

Frequency Response:

10 Hz to 20 kHz: +0/-0.2 dB

Crosstalk:

<-80 dB, 10 Hz to 20 kHz, typical -100 dB @ 1 kHz

Analog Outputs

 

Connectors:

XLR balanced (pin 2 hot)

Impedance:

100 ohm (active transformer)

Max. Output Level:

+22 dBu (balanced)

Full Scale Output Range:

-10 dBu to +22 dBu

D to A Conversion:

24 bit (1bit, 128 times oversampling)

D to A Delay:

0.57 ms @ 48 kHz

Dynamic Range:

>100 dB (unweighted), >104 dB(A)

THD:

-86 dB (0.005 %) @ 1 kHz, -6 dBFS (FS @ +16 dBu)

Frequency Response:

10 Hz to 20 kHz: +0/-0.5 dB

Crosstalk:

<-60 dB, 10 Hz to 20 kHz, typical -90 dB @ 1 kHz

EMC

 

Complies with:

EN 55103-1 and EN 55103-2. FCC part 15, Class B. CISPR 22, Class B

Safety

 

Certified to:

IEC 65, EN 60065, UL 1419, CSA E65

Environment

 

Operating Temperature:

32° F to 122° F (0° C to 50°C)

Storage Temperature:

-22° F to 167° F (-30° C to 70°C)

Humidity:

Max. 90% non-condensing

PCMCIA Interface

 

Connector:

PC card, 68 pin type 1 cards

Standards:

PCMCIA 2.0, JEIDA 4.0

Card Format:

Supports up to 2 MB SRAM

Control Interface

 

MIDI:

In/Out/Thru: 5 Pin DIN

GPI, Pedal, Fader:

1/4” phone jack, 0 ohm to 50 kohm

General

 

Finish:

Anodized aluminum front. Plated and painted steel chassis.

Dimensions:

19" x 1.75" x 8.2" (483 x 44 x 208 mm)

Weight:

5.2 lb. (2.35 kg)

Mains Voltage:

100 to 240 VAC, 50 to 60 Hz (auto-select)

Power Consumption:

<20W

Backup Battery Life:

>10 years

Warranty Parts and labor:

1 year

 

Technical Specifications are subject

 

to change without notice !

 

 

58

Page 59 Page 61
Image 60
Page 59 Page 61
Contents M3000 Page Important Safety Instructions ServiceFor the customers in Canada Certificate Of ConformityTable of Contents Page Main Features Algorithms in the M3000 are IntroductionFront Panel OverloadEngine 1 or Recall Rear Panel PdifSignal Flow Recalling a Preset RecallRecall Displays Factory/User Presets Preset banksCombined Recall Index feature in the Recall Mode Recall & SnapshotsSnapshots Storing a User preset and handling preset names Using a Memory CardStore Combined StoreReverb Wizard Signal SignalInput Optical ThruStatus Bit DitherLevels Menu RangesRouting ParallelDual Mono LinkedRouting & Studio Setup Examples Use two sends on your mixing consoleCreate your own Vocal Reverb Two individual inserts on your mixing consoleHow to move around Preset glideUTILITY/MIDI DisplayMemory Backup Midi OutputSecurity Memory CopyPress Shift followed by UTIL/MIDI to access Midi Monitor Midi Monitor & Midi ImplementationMidi Monitor Ll Midi ImplementationTempo Expert mode Exercise How to edit a presetEdit EditDynamic Morphing Dynamic MorphingMorph direction Constructing a Reverb Preset with the VSS algorithms VSS IntroductionFinding the right Early Type & Size for your track To use the M3000 as a Stereo ReverbVSS Introduction Pre Delay versus Rev Delay Overview of the VSS Reverb SectionMixing the Reverb Out Levels Modulation of the Reverb TailVSS for Film and Post Production Vssfp & VsssrVssfp Film and Post Vsssr Surround Vsssr SurroundVSS3 Reverb ProgramsVSS3 Reverb Early ReflectionsReverb tail ModulationVssgate Reverb ModSpace Mod VSSGateGate Type ColorLow Cut RevBal Lmid DecayLow Xover Low DecayReverb Modulation Vssfp Film & Post Vssfp ReverbEarly Type Several types Early PosRev Width Modulation Front Delay Rear DelayFront Decay Rear DecayRev Depth Reverb Mod R.E ReflectionsREV-3 Rev-3Additional Effects Delay & Pitch DelayPitch Additional Effects EQ FrequencyBand width EQ levelAdditional Effects Chorus & Flanger ChorusFlanger LFO Phase 0, 90 or 180º Additional Effects Flanger & TremoloTremolo Cross FeedbackAdditional Effects Phaser & EXPANDER/GATE PhaserExpander/Gate Additional Effects Compressor CompressorOut Gain Additional Effects DE-ESSER De-esserAppendix the Reset Reset System ParametersReset all presets Store User DefAppendix Self Test Appendix Troubleshooting Appendix Glossary DitheringAppendix Technical Specifications Technical Specifications are subjectTo change without notice Appendix Midi Implementation Chart Control ChangeMidi Cable Pedal CableJack unbalanced XLR Jack balanced XLRM3000 Preset List Top 20 PresetsPreset #21 to HallsClub Carib Bright Slap Reverb Long Pre Dly Medium Guitar HallBallad Drums Medium Vocal Hall Vocal For Thin Voice Big Empty Club114 Sweet Basil Vocal R.E 115 Blackface Amp Preset #137 to Rooms116 Large Hall Clear 117 Soupy Ballad VerbDelayed Hall Preset #191 toPlates Bossa Nova Perc Room R.EGated Reverb Presets ClubsOther Algorithms Vssfp Presets Ultra small reverb presets Indoor Mini Presets #251 toSmall rooms and spaces Indoor Small 301 Wine Cellar M3000 Preset List M3000 Preset List Block of dedicated nature area reverbs Vsssr algorithm presets Effect reverb settingsCombined presets M3000 Preset List M3000 Preset List
Top Page Image Contents