Tascam DP-01FX/CD, D00871320A owner manual Recording

Page 24

Recording

Recording

When you’ve connected a source, and assigned the inputs to tracks, you’re ready to start recording.

 

Figure 1.8: Recording tracks

1

Press the REC key of the track(s) you’re going to record on, which start

 

to flash slowly (this process is called “arming the track(s)”.

2

Press and hold the RECORD key and press the PLAY key.

 

The RECORD key indicator lights red, and the PLAY indicator lights

 

green. The track REC indicators stop flashing and light steadily.

3

Press STOP when you’ve finished recording.

4

To return to the place where you started recording, press and hold

 

down the STOP key, and press the F FWD (LRP = Last Recording Posi-

 

tion) key.

 

To return to the zero point, press and hold down the STOP key and

 

press the REW (RTZ = Return To Zero) key.

5

Press PLAY to start playback of the recorded tracks.

Starting

Use the track fader(s) and the red MASTER fader to adjust the level of

 

 

what you hear.

out

The pan controls position the track in the stereo “image” you hear in

the left and right speakers (or headphones). The center position is

with

marked by a “click” when you turn the knob.

The EQ HIGH and EQ LOW equalization controls work in a similar way

your

to the bass and treble tone controls on a stereo system. The center

“click” position of the knob means there’s no cut or boost for that con-

DP-01

trol.

You can re-record the track if you’re not happy with it by going back to

the original point and repeating the process.

When you’re happy with your recording, you can un-arm the track(s) (“safe” them) and arm and record on other tracks. Remember to re- assign the inputs as well as arming the tracks.

Press the REW or F FWD keys for a short while and then release them to move backwards or forwards through your recording (like a tape recorder). Press and hold these keys to increase the rewind or fast for- ward speed. Press STOP to stop (again, like a tape recorder).

The DP-01FX and DP-01FX/CD con- tain internal input effects proces-

sors (MULTI). See “DP-01FX Appendix” on page 62 for details.

The faders and other mixer controls adjust the output level of the

recorded when playing back recorded tracks.

You can change the EQ control point of the high and low equalization con-

trols. See “EQ settings” on page 31 for details.

24 TASCAM DP-01 Owner’s Manual

Page 23 Page 25
Image 24
Page 23 Page 25
Contents DP-01FX DP-01FX/CD Important Safety Precautions Important Safety Instructions Safety Information Contents Using the USB connection DP-01FX AppendixDP-01FX/CD Appendix Commonly-used functionsPower connections to the DP-01 Table of FiguresStarting out with your DP-01 Getting startedThis manual About the power adaptor Getting startedCopyright DP-01 Line-upStartup & shutdown Starting up the DP-01Access light How to play back demo songsYou can now use the rear panel switch to turn off the DP-01 Startup & shutdownStarting out with your DP-01 Navigation NavigationShift key TitlingConnecting your DP-01 to other equipment Connecting your DP-01 to other equipmentConnecting your DP-01 to other equipment Input Mode switch Rear panel connectionsSignals sent from this are the same as those sent from Managing your songs Managing your songsCreating a new song Storing songsLoading a saved song Erasing a songErasing many songs at one time Song informationAdditional song operations Assigning inputs Assigning inputs to tracksRecording RecordingMore advanced features Using marks to locate positionsPunch recording BouncingMixdown and mastering Mixdown and masteringMastering Advanced techniques LocationDirect location Location marksOUT marks Use the jog wheel to select a mark and pressUsing the meters Using the metersEQ settings Press Cursor keyPunching PunchingRehearsal Pre-roll and post-roll times Bouncing BouncingSetting the repeat interval RepeatTempo setting Selecting the time modeWorking in bars & beats Working in bars & beatsWhen INT is selected at Output internal metronome MetronomeWorking with Midi Midi Clock, etcPress Menu and scroll down to Midi and press the key Midi timecode Disk management Disk managementSelecting the active partition Formatting a diskFormatting a partition Reform Formatting the FAT partitionAutomatic song creation Advanced song management Advanced song managementCopying songs Deleting unused dataProtecting a song Using the USB connection Using the USB connectionDisconnecting from Windows ME / 2000 / XP systems With System requirementsCurrent song is shown with the ← symbol beside it Open and CloseBacking up and restoring songs Backing upRestoring a song Once the song archive is on the PC, you can close the DP-01Importing and exporting tracks Importing a trackExporting tracks When all tracks for export have been selected, press Enter AudioFor export Up a titling screenDefault file name for you to edit Exporting the mastered stereo tracksUsing edit mode About track editingAbout track editing IN, OUT and toTrack editing functions You can change the following valuesMove Paste Open There is only one value that you can changeThere are two values that you can change Press the Undo key briefly, to undo the last undoable actionAbout track editing Troubleshooting TroubleshootingMessages Files to the FAT partition for importYou can’t clone a track to itself. Clone Track on Specifications Analog specifications INPUTs a and BDigital specifications Audio performanceSpecifications Physical characteristicsDimensional drawings Block diagram DP-01 Stereo MIX L Stereo MIX RTuning a guitar Phantom powerDP-01FX Appendix Balanced XLR inputsNoise reduction Multi-effect Multi-effectSetting the effect volume Available multi-effect settingsElectric guitar settings Egtr Acoustic guitar settings Agtr Vocal settings Vocal EffectReverb ReverbDP-01FX/CD Appendix About CD-R and CD-RW discsHandling of compact discs Media Compatibility Table Media Compatibility TableAudio CD Menu Opening/Closing CDsPlaying back audio CDs Audio CD Menu Making an audio CDWriting by Disk At Once Move the arrow using Audio CD MenuWriting by Track at Once Finalizing CDs Erasing Audio CDsPress the Enter key to erase the CD-RW Data CD Menu Data CD MenuImporting from a CD Names of any WAV format files on the CD are displayedExporting to CDs Keys, and press the Insert keyTitling on Available space on the Data CD and the total file sizeBacking up songs to a CD Or the Data dial. Titling onRestoring songs from a CD If you insert a written CD-RW instead of a blank CDErasing data CDs CD-related Error Messages An error occurred in the Backup execution processMessages MessagesMessages No Disk Insert a CD has not been inserted. Insert a blank CD Commonly-used functions How do I..?How do I..? Jump to a location markTimecode or Midi clock Trim the in and OUT and to points DP-01FX DP-01FX/CD

D00871320A, DP-01FX/CD specifications

The Tascam DP-01FX/CD is a versatile and user-friendly digital portastudio that perfectly balances professional quality with straightforward operation, making it an exceptional choice for both novice and seasoned musicians. Designed for multitrack recording, this device integrates a wide range of features, enabling users to create high-quality audio projects with ease.

At the heart of the DP-01FX/CD is its capacity to record up to eight tracks simultaneously, with a total of 16 tracks available for mixing. This capability allows for a rich layering of sounds, making it suitable for recording full bands, solo artists, or intricate soundscapes. The onboard effects processor offers 50 different effects types, including reverbs, delays, and modulation effects, giving users a broad palette for sound design and enhancement.

One of the standout features of the DP-01FX/CD is its built-in CD burner, enabling users to easily create audio CDs directly from their recordings. This feature provides convenience for artists looking to distribute their music quickly without needing a separate computer or additional equipment. The device also includes a high-quality dual-XLR mic preamp, ensuring that vocal and instrumental recordings maintain clarity and depth.

Connectivity is another strong point of the DP-01FX/CD, as it incorporates multiple input options, including XLR, TRS, and RCA jacks. This flexibility allows for various instruments and microphones to be plugged in simultaneously, streamlining the recording process. Additionally, the unit supports USB connectivity, enabling users to transfer their projects to and from a computer for further editing or backup.

The user-friendly interface is designed for straightforward navigation, featuring a backlit LCD screen and intuitive controls. This makes it easy for users to adjust levels, apply effects, and manage tracks without getting lost in complicated menus. Moreover, the built-in metronome and tuner further enhance the recording experience, providing musicians with the tools needed to stay in time and in pitch.

In conclusion, the Tascam DP-01FX/CD is an all-in-one solution for musicians and audio producers seeking a blend of functionality and ease of use. Its robust features, professional-grade sound quality, and convenient CD-burning capability make it an excellent choice for those looking to create high-fidelity audio recordings in a simple, efficient manner.
Top Page Image Contents