Tascam DP-01FX/CD, D00871320A owner manual Punching, Rehearsal

Page 32

Punching

Punching

As mentioned in “Punch recording” on page 25, the DP-01 provides two manual ways of changing between playback and recording modes: using the PLAY and RECORD keys, and using the foot switch. There is also an automated punch mode, described here.

Rehearsal

The autounch mode allows you to rehearse your playing before actually making a recording.

1First, set the IN and OUT points (“IN and OUT marks” on page 29) so that they correspond to the points where you want recording to start, and where you want it to finish.

The RHSL key indi- cates you are in "rehearsal" mode, as long as AUTO

PUNCH is not lit. Your rehearsal take(s) is not actually recorded.

2Assign an input or inputs to a track or tracks (“Assigning inputs” on page 23), and arm those track(s) for recording (press the track’s REC key so that it flashes).

3Press the AUTO PUNCH key so that it lights.

4Press the RHSL (rehearsal) key so that it lights.

5Press the PLAY key.

Playback starts from before the IN point (the PLAY indicator is lit).

If you’re replacing a mistake, make sure that the sound you are recording

matches the sound you're replacing (same effect settings, etc.).

At the IN point, the playback of the armed track(s) stops. The RECORD indicator starts to flash, indicating this the point where recording would start were you actually punching in.

At the OUT point, the signal you hear returns to what you recorded earlier. The RECORD indicator stops flashing.

When playback reaches the post-roll point, it stops. When you do your next rehearsal or punch, playback will start from the pre-roll point.

If the IN and OUT points are not where they should be for your

punch recording operation, you can turn off AUTO PUNCH and edit their position (See “IN and OUT marks” on page 29).

Advanced techniques

IN point

OUT point

Pre-roll

Post-roll

 

What you hear

 

 

 

 

Playback from previously

Recorded signals are cut

Return to track playback

 

 

recorded track starts at

(RECORD indicator

(RECORD indicator goes

 

pre-roll position, up to IN

flashes in rehearsal,

out) and playback stops

 

 

point (PLAY indicator lights).

lights when recording)

at post-roll point

 

 

 

You can always hear the input signal

 

 

 

 

 

6

Repeat the rehearsal as many times as you need until you are happy

You

can rehearse

 

with your performance.

 

by

looping bet-

 

 

 

ween the pre-roll and post-roll

 

 

 

points using the REPEAT key.

32 TASCAM DP-01 Owner’s Manual

Page 31 Page 33
Image 32
Page 31 Page 33
Contents DP-01FX DP-01FX/CD Important Safety Precautions Important Safety Instructions Safety Information Contents Using the USB connection DP-01FX AppendixDP-01FX/CD Appendix Commonly-used functionsPower connections to the DP-01 Table of FiguresThis manual Starting out with your DP-01Getting started About the power adaptor Getting startedCopyright DP-01 Line-upStartup & shutdown Starting up the DP-01Access light How to play back demo songsYou can now use the rear panel switch to turn off the DP-01 Startup & shutdownStarting out with your DP-01 Navigation NavigationShift key TitlingConnecting your DP-01 to other equipment Connecting your DP-01 to other equipmentConnecting your DP-01 to other equipment Input Mode switch Rear panel connectionsSignals sent from this are the same as those sent from Managing your songs Managing your songsCreating a new song Storing songsLoading a saved song Erasing a songAdditional song operations Erasing many songs at one timeSong information Assigning inputs Assigning inputs to tracksRecording RecordingMore advanced features Using marks to locate positionsPunch recording BouncingMixdown and mastering Mixdown and masteringMastering Advanced techniques LocationDirect location Location marksOUT marks Use the jog wheel to select a mark and pressUsing the meters Using the metersEQ settings Press Cursor keyRehearsal PunchingPunching Pre-roll and post-roll times Bouncing BouncingSetting the repeat interval RepeatTempo setting Selecting the time modeWorking in bars & beats Working in bars & beatsWhen INT is selected at Output internal metronome MetronomePress Menu and scroll down to Midi and press the key Working with MidiMidi Clock, etc Midi timecode Disk management Disk managementSelecting the active partition Formatting a diskAutomatic song creation Formatting a partition ReformFormatting the FAT partition Advanced song management Advanced song managementCopying songs Deleting unused dataProtecting a song Using the USB connection Using the USB connectionDisconnecting from Windows ME / 2000 / XP systems With System requirementsCurrent song is shown with the ← symbol beside it Open and CloseBacking up and restoring songs Backing upRestoring a song Once the song archive is on the PC, you can close the DP-01Exporting tracks Importing and exporting tracksImporting a track When all tracks for export have been selected, press Enter AudioFor export Up a titling screenDefault file name for you to edit Exporting the mastered stereo tracksUsing edit mode About track editingAbout track editing IN, OUT and toTrack editing functions You can change the following valuesMove Paste Open There is only one value that you can changeThere are two values that you can change Press the Undo key briefly, to undo the last undoable actionAbout track editing Troubleshooting TroubleshootingMessages Files to the FAT partition for importYou can’t clone a track to itself. Clone Track on Specifications Analog specifications INPUTs a and BDigital specifications Audio performanceDimensional drawings SpecificationsPhysical characteristics Block diagram DP-01 Stereo MIX L Stereo MIX RTuning a guitar Phantom powerDP-01FX Appendix Balanced XLR inputsNoise reduction Multi-effect Multi-effectElectric guitar settings Egtr Setting the effect volumeAvailable multi-effect settings Acoustic guitar settings Agtr Vocal settings Vocal EffectReverb ReverbHandling of compact discs DP-01FX/CD AppendixAbout CD-R and CD-RW discs Media Compatibility Table Media Compatibility TablePlaying back audio CDs Audio CD MenuOpening/Closing CDs Writing by Disk At Once Audio CD MenuMaking an audio CD Move the arrow using Audio CD MenuWriting by Track at Once Press the Enter key to erase the CD-RW Finalizing CDsErasing Audio CDs Data CD Menu Data CD MenuImporting from a CD Names of any WAV format files on the CD are displayedExporting to CDs Keys, and press the Insert keyTitling on Available space on the Data CD and the total file sizeBacking up songs to a CD Or the Data dial. Titling onRestoring songs from a CD If you insert a written CD-RW instead of a blank CDErasing data CDs CD-related Error Messages An error occurred in the Backup execution processMessages MessagesMessages No Disk Insert a CD has not been inserted. Insert a blank CD Commonly-used functions How do I..?How do I..? Jump to a location markTimecode or Midi clock Trim the in and OUT and to points DP-01FX DP-01FX/CD

D00871320A, DP-01FX/CD specifications

The Tascam DP-01FX/CD is a versatile and user-friendly digital portastudio that perfectly balances professional quality with straightforward operation, making it an exceptional choice for both novice and seasoned musicians. Designed for multitrack recording, this device integrates a wide range of features, enabling users to create high-quality audio projects with ease.

At the heart of the DP-01FX/CD is its capacity to record up to eight tracks simultaneously, with a total of 16 tracks available for mixing. This capability allows for a rich layering of sounds, making it suitable for recording full bands, solo artists, or intricate soundscapes. The onboard effects processor offers 50 different effects types, including reverbs, delays, and modulation effects, giving users a broad palette for sound design and enhancement.

One of the standout features of the DP-01FX/CD is its built-in CD burner, enabling users to easily create audio CDs directly from their recordings. This feature provides convenience for artists looking to distribute their music quickly without needing a separate computer or additional equipment. The device also includes a high-quality dual-XLR mic preamp, ensuring that vocal and instrumental recordings maintain clarity and depth.

Connectivity is another strong point of the DP-01FX/CD, as it incorporates multiple input options, including XLR, TRS, and RCA jacks. This flexibility allows for various instruments and microphones to be plugged in simultaneously, streamlining the recording process. Additionally, the unit supports USB connectivity, enabling users to transfer their projects to and from a computer for further editing or backup.

The user-friendly interface is designed for straightforward navigation, featuring a backlit LCD screen and intuitive controls. This makes it easy for users to adjust levels, apply effects, and manage tracks without getting lost in complicated menus. Moreover, the built-in metronome and tuner further enhance the recording experience, providing musicians with the tools needed to stay in time and in pitch.

In conclusion, the Tascam DP-01FX/CD is an all-in-one solution for musicians and audio producers seeking a blend of functionality and ease of use. Its robust features, professional-grade sound quality, and convenient CD-burning capability make it an excellent choice for those looking to create high-fidelity audio recordings in a simple, efficient manner.
Top Page Image Contents