Tascam DP-01FX/CD, D00871320A owner manual Using the meters

Page 30
Master meters

Using the meters

Using the meters

Meters to let you know what’s going on with the audio in the DP-01. Here are a few little hints and tips which may help you.

As well as showing you the level of signals, the meters can show you if the signals are actually getting to the DP Even if you can’t hear anything and the input meters are showing a signal, it means that the connections from the instrument to the DPay (and you should probably check

your monitoring equipment levels).

Advanced techniques

Figure 2.1: The DP-01 meters

It’s important to remember that meters should never be continuously at the top of the bar. If they are, it means the level is too high, and you will proba bly experience distortion. Digital distortion is unpleasant (unlike, say, tube guitar amp distortion), and you need to avoid it.

Input meters These meters (A and B) show the level of the signal com ing into the DPAdjust the level with the front panel controls, or the instrument volume control, if available.

Track meters These meters (1 through 8) show the volume of the signal recorded on the track (unarmed track s) or entering the track (armed tracks). Remember that the faders do not control the level of signals sent to the track, and will never affect the track meter readings.

These meters (L and R) show the master level at all times. The MASTER fader controls the level of these meters.

You can change the way the meters are displayed.

1Press MENU, and then select the PREFERENCE menu:

2The Meter option allows you to use the jog wheel to pick from four options:

S.Fat (short and fat)

S.Slim (short and thin),

L.Fat (tall and fat)

L.Slim (tall and thin)

The behavior of all these is the same—only the appearance differs.

30 TASCAM DP-01 Owner’s Manual

Page 29 Page 31
Image 30
Page 29 Page 31
Contents DP-01FX DP-01FX/CD Important Safety Precautions Important Safety Instructions Safety Information Contents Using the USB connection DP-01FX AppendixDP-01FX/CD Appendix Commonly-used functionsPower connections to the DP-01 Table of FiguresStarting out with your DP-01 Getting startedThis manual Copyright About the power adaptorGetting started DP-01 Line-upStartup & shutdown Starting up the DP-01You can now use the rear panel switch to turn off the DP-01 Access lightHow to play back demo songs Startup & shutdownStarting out with your DP-01 Navigation NavigationShift key TitlingConnecting your DP-01 to other equipment Connecting your DP-01 to other equipmentConnecting your DP-01 to other equipment Input Mode switch Rear panel connectionsSignals sent from this are the same as those sent from Creating a new song Managing your songsManaging your songs Storing songsLoading a saved song Erasing a songErasing many songs at one time Song informationAdditional song operations Assigning inputs Assigning inputs to tracksRecording RecordingPunch recording More advanced featuresUsing marks to locate positions BouncingMixdown and mastering Mixdown and masteringMastering Direct location Advanced techniquesLocation Location marksOUT marks Use the jog wheel to select a mark and pressUsing the meters Using the metersEQ settings Press Cursor keyPunching PunchingRehearsal Pre-roll and post-roll times Bouncing BouncingSetting the repeat interval RepeatWorking in bars & beats Tempo settingSelecting the time mode Working in bars & beatsWhen INT is selected at Output internal metronome MetronomeWorking with Midi Midi Clock, etcPress Menu and scroll down to Midi and press the key Midi timecode Selecting the active partition Disk managementDisk management Formatting a diskFormatting a partition Reform Formatting the FAT partitionAutomatic song creation Copying songs Advanced song managementAdvanced song management Deleting unused dataProtecting a song Disconnecting from Windows ME / 2000 / XP systems With Using the USB connectionUsing the USB connection System requirementsBacking up and restoring songs Current song is shown with the ← symbol beside itOpen and Close Backing upRestoring a song Once the song archive is on the PC, you can close the DP-01Importing and exporting tracks Importing a trackExporting tracks For export When all tracks for export have been selected, press EnterAudio Up a titling screenDefault file name for you to edit Exporting the mastered stereo tracksAbout track editing Using edit modeAbout track editing IN, OUT and toTrack editing functions You can change the following valuesMove Paste Open There is only one value that you can changeThere are two values that you can change Press the Undo key briefly, to undo the last undoable actionAbout track editing Troubleshooting TroubleshootingMessages Files to the FAT partition for importYou can’t clone a track to itself. Clone Track on Digital specifications SpecificationsAnalog specifications INPUTs a and B Audio performanceSpecifications Physical characteristicsDimensional drawings Block diagram DP-01 Stereo MIX L Stereo MIX RDP-01FX Appendix Tuning a guitarPhantom power Balanced XLR inputsNoise reduction Multi-effect Multi-effectSetting the effect volume Available multi-effect settingsElectric guitar settings Egtr Acoustic guitar settings Agtr Vocal settings Vocal EffectReverb ReverbDP-01FX/CD Appendix About CD-R and CD-RW discsHandling of compact discs Media Compatibility Table Media Compatibility TableAudio CD Menu Opening/Closing CDsPlaying back audio CDs Audio CD Menu Making an audio CDWriting by Disk At Once Move the arrow using Audio CD MenuWriting by Track at Once Finalizing CDs Erasing Audio CDsPress the Enter key to erase the CD-RW Importing from a CD Data CD MenuData CD Menu Names of any WAV format files on the CD are displayedTitling on Exporting to CDsKeys, and press the Insert key Available space on the Data CD and the total file sizeBacking up songs to a CD Or the Data dial. Titling onRestoring songs from a CD If you insert a written CD-RW instead of a blank CDErasing data CDs CD-related Error Messages An error occurred in the Backup execution processMessages MessagesMessages No Disk Insert a CD has not been inserted. Insert a blank CD Commonly-used functions How do I..?How do I..? Jump to a location markTimecode or Midi clock Trim the in and OUT and to points DP-01FX DP-01FX/CD

D00871320A, DP-01FX/CD specifications

The Tascam DP-01FX/CD is a versatile and user-friendly digital portastudio that perfectly balances professional quality with straightforward operation, making it an exceptional choice for both novice and seasoned musicians. Designed for multitrack recording, this device integrates a wide range of features, enabling users to create high-quality audio projects with ease.

At the heart of the DP-01FX/CD is its capacity to record up to eight tracks simultaneously, with a total of 16 tracks available for mixing. This capability allows for a rich layering of sounds, making it suitable for recording full bands, solo artists, or intricate soundscapes. The onboard effects processor offers 50 different effects types, including reverbs, delays, and modulation effects, giving users a broad palette for sound design and enhancement.

One of the standout features of the DP-01FX/CD is its built-in CD burner, enabling users to easily create audio CDs directly from their recordings. This feature provides convenience for artists looking to distribute their music quickly without needing a separate computer or additional equipment. The device also includes a high-quality dual-XLR mic preamp, ensuring that vocal and instrumental recordings maintain clarity and depth.

Connectivity is another strong point of the DP-01FX/CD, as it incorporates multiple input options, including XLR, TRS, and RCA jacks. This flexibility allows for various instruments and microphones to be plugged in simultaneously, streamlining the recording process. Additionally, the unit supports USB connectivity, enabling users to transfer their projects to and from a computer for further editing or backup.

The user-friendly interface is designed for straightforward navigation, featuring a backlit LCD screen and intuitive controls. This makes it easy for users to adjust levels, apply effects, and manage tracks without getting lost in complicated menus. Moreover, the built-in metronome and tuner further enhance the recording experience, providing musicians with the tools needed to stay in time and in pitch.

In conclusion, the Tascam DP-01FX/CD is an all-in-one solution for musicians and audio producers seeking a blend of functionality and ease of use. Its robust features, professional-grade sound quality, and convenient CD-burning capability make it an excellent choice for those looking to create high-fidelity audio recordings in a simple, efficient manner.
Top Page Image Contents