Tascam D00871320A, DP-01FX/CD Formatting a partition Reform, Formatting the FAT partition

Page 41

Advanced techniques

4Press ENTER.

A message reminds you that all songs will be lost.

5Press ENTER again to format the disk with the new partition sizes (or EXIT to escape without formatting).

It is most important that the power to the DP-01 is not turned off when

the disk is being formatted. If this happens, the unit may become unusable.

Formatting a partition (Reform)

If you want to keep partition sizes the same, or you only wish to clean out one partition of the hard disk, this is the way to do it.

1Press MENU and select the DISK menu.

2

Select the REFORM action and press the

key

An arrow (←) shows the active partition. The sizes of the partitions are shown (not the available space).

3Select the partition to be re-formatted (shown by the cursor) and press ENTER.

A popup message reminds you that all data on the partition will be lost.

4Press ENTER to reformat the partition.

You cannot undo this operation—all data on the selected partition will be

lost. ONLY CARRY OUT THIS OPERATION IF YOU ARE SURE THIS IS WHAT YOU REALLY WANT TO DO.

Formatting the FAT partition

The FAT partition is used for transfer between the DP-01 and a per- sonal computer. Its size is fixed by the DP-01, and cannot be changed.

1Press MENU and select the DISK menu.

2

Select the FAT REFORM action and press the

key

3Press ENTER.

A popup message reminds you that all data on the FAT partition will be lost.

4Press ENTER to reformat the FAT partition.

You cannot undo this operation—all data on the FAT partition will be

lost. ONLY CARRY OUT THIS OPERATION IF YOU ARE SURE THIS IS WHAT YOU REALLY WANT TO DO.

Disk management

Automatic song creation

After formatting a disk or a partition, a new song is always created on any blank partition, in the same way that one is created if the only song on a partition is erased. You always have a song available to work with.

TASCAM DP-01 Owner’s Manual 41

Page 40 Page 42
Image 41
Page 40 Page 42
Contents DP-01FX DP-01FX/CD Important Safety Precautions Important Safety Instructions Safety Information Contents DP-01FX Appendix Using the USB connectionCommonly-used functions DP-01FX/CD AppendixTable of Figures Power connections to the DP-01This manual Starting out with your DP-01Getting started Getting started About the power adaptorCopyright DP-01 Line-upStarting up the DP-01 Startup & shutdownHow to play back demo songs Access lightYou can now use the rear panel switch to turn off the DP-01 Startup & shutdownStarting out with your DP-01 Navigation NavigationTitling Shift keyConnecting your DP-01 to other equipment Connecting your DP-01 to other equipmentConnecting your DP-01 to other equipment Rear panel connections Input Mode switchSignals sent from this are the same as those sent from Managing your songs Managing your songsCreating a new song Storing songsErasing a song Loading a saved songAdditional song operations Erasing many songs at one timeSong information Assigning inputs to tracks Assigning inputsRecording RecordingUsing marks to locate positions More advanced featuresPunch recording BouncingMixdown and mastering Mixdown and masteringMastering Location Advanced techniquesDirect location Location marksUse the jog wheel to select a mark and press OUT marksUsing the meters Using the metersPress Cursor key EQ settingsRehearsal PunchingPunching Pre-roll and post-roll times Bouncing BouncingRepeat Setting the repeat intervalSelecting the time mode Tempo settingWorking in bars & beats Working in bars & beatsMetronome When INT is selected at Output internal metronomePress Menu and scroll down to Midi and press the key Working with MidiMidi Clock, etc Midi timecode Disk management Disk managementSelecting the active partition Formatting a diskAutomatic song creation Formatting a partition ReformFormatting the FAT partition Advanced song management Advanced song managementCopying songs Deleting unused dataProtecting a song Using the USB connection Using the USB connectionDisconnecting from Windows ME / 2000 / XP systems With System requirementsOpen and Close Current song is shown with the ← symbol beside itBacking up and restoring songs Backing upOnce the song archive is on the PC, you can close the DP-01 Restoring a songExporting tracks Importing and exporting tracksImporting a track Audio When all tracks for export have been selected, press EnterFor export Up a titling screenExporting the mastered stereo tracks Default file name for you to editAbout track editing Using edit modeAbout track editing IN, OUT and toYou can change the following values Track editing functionsMove Paste There is only one value that you can change OpenPress the Undo key briefly, to undo the last undoable action There are two values that you can changeAbout track editing Troubleshooting TroubleshootingFiles to the FAT partition for import MessagesYou can’t clone a track to itself. Clone Track on Analog specifications INPUTs a and B SpecificationsDigital specifications Audio performanceDimensional drawings SpecificationsPhysical characteristics Stereo MIX L Stereo MIX R Block diagram DP-01Phantom power Tuning a guitarDP-01FX Appendix Balanced XLR inputsNoise reduction Multi-effect Multi-effectElectric guitar settings Egtr Setting the effect volumeAvailable multi-effect settings Acoustic guitar settings Agtr Effect Vocal settings VocalReverb ReverbHandling of compact discs DP-01FX/CD AppendixAbout CD-R and CD-RW discs Media Compatibility Table Media Compatibility TablePlaying back audio CDs Audio CD MenuOpening/Closing CDs Writing by Disk At Once Audio CD MenuMaking an audio CD Audio CD Menu Move the arrow usingWriting by Track at Once Press the Enter key to erase the CD-RW Finalizing CDsErasing Audio CDs Data CD Menu Data CD MenuImporting from a CD Names of any WAV format files on the CD are displayedKeys, and press the Insert key Exporting to CDsTitling on Available space on the Data CD and the total file sizeOr the Data dial. Titling on Backing up songs to a CDIf you insert a written CD-RW instead of a blank CD Restoring songs from a CDErasing data CDs An error occurred in the Backup execution process CD-related Error MessagesMessages MessagesMessages No Disk Insert a CD has not been inserted. Insert a blank CD How do I..? Commonly-used functionsJump to a location mark How do I..?Timecode or Midi clock Trim the in and OUT and to points DP-01FX DP-01FX/CD

D00871320A, DP-01FX/CD specifications

The Tascam DP-01FX/CD is a versatile and user-friendly digital portastudio that perfectly balances professional quality with straightforward operation, making it an exceptional choice for both novice and seasoned musicians. Designed for multitrack recording, this device integrates a wide range of features, enabling users to create high-quality audio projects with ease.

At the heart of the DP-01FX/CD is its capacity to record up to eight tracks simultaneously, with a total of 16 tracks available for mixing. This capability allows for a rich layering of sounds, making it suitable for recording full bands, solo artists, or intricate soundscapes. The onboard effects processor offers 50 different effects types, including reverbs, delays, and modulation effects, giving users a broad palette for sound design and enhancement.

One of the standout features of the DP-01FX/CD is its built-in CD burner, enabling users to easily create audio CDs directly from their recordings. This feature provides convenience for artists looking to distribute their music quickly without needing a separate computer or additional equipment. The device also includes a high-quality dual-XLR mic preamp, ensuring that vocal and instrumental recordings maintain clarity and depth.

Connectivity is another strong point of the DP-01FX/CD, as it incorporates multiple input options, including XLR, TRS, and RCA jacks. This flexibility allows for various instruments and microphones to be plugged in simultaneously, streamlining the recording process. Additionally, the unit supports USB connectivity, enabling users to transfer their projects to and from a computer for further editing or backup.

The user-friendly interface is designed for straightforward navigation, featuring a backlit LCD screen and intuitive controls. This makes it easy for users to adjust levels, apply effects, and manage tracks without getting lost in complicated menus. Moreover, the built-in metronome and tuner further enhance the recording experience, providing musicians with the tools needed to stay in time and in pitch.

In conclusion, the Tascam DP-01FX/CD is an all-in-one solution for musicians and audio producers seeking a blend of functionality and ease of use. Its robust features, professional-grade sound quality, and convenient CD-burning capability make it an excellent choice for those looking to create high-fidelity audio recordings in a simple, efficient manner.
Top Page Image Contents