Tascam DP-01FX/CD, D00871320A owner manual Mixdown and mastering

Page 26

Mixdown and mastering

Mixdown and mastering

This is the last stage in creating a song, allowing you to create a file which you can play back into a stereo recorder, and export to a WAV file for further processing, archiving, recording, etc. on a personal computer (“Exporting the mastered stereo tracks” on page 49).

Mixdown This is the art of mixing the different tracks you have recorded earlier so that the whole song sounds “right”—everything is at the right volume, and the song sounds like one piece of music.

There are no real rules to mixing, except that if you like the mix, and other people like it, it’s probably a good mix.

Use the eight track faders to adjust the relative volume of the tracks and the red MASTER fader to adjust the overall level, and watch the L and R meters at the right of the display to make sure that the mix is not too loud (if it’s too loud, it will distort, and sound bad).

Use the EQ HIGH and EQ LOW (tone) controls to boost or cut bass and treble from the individual tracks.

If you have an external effect processor connected through the SEND and RETURN loop, adjust the EFFECT SEND levels for each track. This is the amount of signal sent from each track to the effect. You can use this to add effects only to certain tracks. Use the EFFECT RETURN con- trol to adjust the amount of the effect returned to the mix.

Use the PAN controls to adjust the left-right position of each track in the stereo mix.

To cut out the sound of a track, use the SHIFT key and the track’s REC key to mute (the orange MUTE indicator lights for muted tracks) and un-mute the track.

Starting out with your DP-01

The most important

components of a mix are your ears—if you think it sounds good, then it is.

You don’t have to keep levels the same through the whole song (try

raising the level of a guitar during solos, for example).

On the DP-01FX

and DP-01FX/CD, you can use the internal reverb unit instead of an external effect proces- sor (“Reverb” on page 68).

If you have two

tracks with differ- ent versions of the same part, you can use the mute function to make easy comparisons between the two.

The track meters show the level of the signal recorded on the track,

not the level sent from the track.

26 TASCAM DP-01 Owner’s Manual

Page 25 Page 27
Image 26
Page 25 Page 27
Contents DP-01FX DP-01FX/CD Important Safety Precautions Important Safety Instructions Safety Information Contents Using the USB connection DP-01FX AppendixDP-01FX/CD Appendix Commonly-used functionsPower connections to the DP-01 Table of FiguresThis manual Starting out with your DP-01Getting started Copyright About the power adaptorGetting started DP-01 Line-upStartup & shutdown Starting up the DP-01You can now use the rear panel switch to turn off the DP-01 Access lightHow to play back demo songs Startup & shutdownStarting out with your DP-01 Navigation NavigationShift key TitlingConnecting your DP-01 to other equipment Connecting your DP-01 to other equipmentConnecting your DP-01 to other equipment Input Mode switch Rear panel connectionsSignals sent from this are the same as those sent from Creating a new song Managing your songsManaging your songs Storing songsLoading a saved song Erasing a songAdditional song operations Erasing many songs at one timeSong information Assigning inputs Assigning inputs to tracksRecording RecordingPunch recording More advanced featuresUsing marks to locate positions BouncingMixdown and mastering Mixdown and masteringMastering Direct location Advanced techniquesLocation Location marksOUT marks Use the jog wheel to select a mark and pressUsing the meters Using the metersEQ settings Press Cursor keyRehearsal PunchingPunching Pre-roll and post-roll times Bouncing BouncingSetting the repeat interval RepeatWorking in bars & beats Tempo settingSelecting the time mode Working in bars & beatsWhen INT is selected at Output internal metronome MetronomePress Menu and scroll down to Midi and press the key Working with MidiMidi Clock, etc Midi timecode Selecting the active partition Disk managementDisk management Formatting a diskAutomatic song creation Formatting a partition ReformFormatting the FAT partition Copying songs Advanced song managementAdvanced song management Deleting unused dataProtecting a song Disconnecting from Windows ME / 2000 / XP systems With Using the USB connectionUsing the USB connection System requirementsBacking up and restoring songs Current song is shown with the ← symbol beside itOpen and Close Backing upRestoring a song Once the song archive is on the PC, you can close the DP-01Exporting tracks Importing and exporting tracksImporting a track For export When all tracks for export have been selected, press EnterAudio Up a titling screenDefault file name for you to edit Exporting the mastered stereo tracksAbout track editing Using edit modeAbout track editing IN, OUT and toTrack editing functions You can change the following valuesMove Paste Open There is only one value that you can changeThere are two values that you can change Press the Undo key briefly, to undo the last undoable actionAbout track editing Troubleshooting TroubleshootingMessages Files to the FAT partition for importYou can’t clone a track to itself. Clone Track on Digital specifications SpecificationsAnalog specifications INPUTs a and B Audio performanceDimensional drawings SpecificationsPhysical characteristics Block diagram DP-01 Stereo MIX L Stereo MIX RDP-01FX Appendix Tuning a guitarPhantom power Balanced XLR inputsNoise reduction Multi-effect Multi-effectElectric guitar settings Egtr Setting the effect volumeAvailable multi-effect settings Acoustic guitar settings Agtr Vocal settings Vocal EffectReverb ReverbHandling of compact discs DP-01FX/CD AppendixAbout CD-R and CD-RW discs Media Compatibility Table Media Compatibility TablePlaying back audio CDs Audio CD MenuOpening/Closing CDs Writing by Disk At Once Audio CD MenuMaking an audio CD Move the arrow using Audio CD MenuWriting by Track at Once Press the Enter key to erase the CD-RW Finalizing CDsErasing Audio CDs Importing from a CD Data CD MenuData CD Menu Names of any WAV format files on the CD are displayedTitling on Exporting to CDsKeys, and press the Insert key Available space on the Data CD and the total file sizeBacking up songs to a CD Or the Data dial. Titling onRestoring songs from a CD If you insert a written CD-RW instead of a blank CDErasing data CDs CD-related Error Messages An error occurred in the Backup execution processMessages MessagesMessages No Disk Insert a CD has not been inserted. Insert a blank CD Commonly-used functions How do I..?How do I..? Jump to a location markTimecode or Midi clock Trim the in and OUT and to points DP-01FX DP-01FX/CD

D00871320A, DP-01FX/CD specifications

The Tascam DP-01FX/CD is a versatile and user-friendly digital portastudio that perfectly balances professional quality with straightforward operation, making it an exceptional choice for both novice and seasoned musicians. Designed for multitrack recording, this device integrates a wide range of features, enabling users to create high-quality audio projects with ease.

At the heart of the DP-01FX/CD is its capacity to record up to eight tracks simultaneously, with a total of 16 tracks available for mixing. This capability allows for a rich layering of sounds, making it suitable for recording full bands, solo artists, or intricate soundscapes. The onboard effects processor offers 50 different effects types, including reverbs, delays, and modulation effects, giving users a broad palette for sound design and enhancement.

One of the standout features of the DP-01FX/CD is its built-in CD burner, enabling users to easily create audio CDs directly from their recordings. This feature provides convenience for artists looking to distribute their music quickly without needing a separate computer or additional equipment. The device also includes a high-quality dual-XLR mic preamp, ensuring that vocal and instrumental recordings maintain clarity and depth.

Connectivity is another strong point of the DP-01FX/CD, as it incorporates multiple input options, including XLR, TRS, and RCA jacks. This flexibility allows for various instruments and microphones to be plugged in simultaneously, streamlining the recording process. Additionally, the unit supports USB connectivity, enabling users to transfer their projects to and from a computer for further editing or backup.

The user-friendly interface is designed for straightforward navigation, featuring a backlit LCD screen and intuitive controls. This makes it easy for users to adjust levels, apply effects, and manage tracks without getting lost in complicated menus. Moreover, the built-in metronome and tuner further enhance the recording experience, providing musicians with the tools needed to stay in time and in pitch.

In conclusion, the Tascam DP-01FX/CD is an all-in-one solution for musicians and audio producers seeking a blend of functionality and ease of use. Its robust features, professional-grade sound quality, and convenient CD-burning capability make it an excellent choice for those looking to create high-fidelity audio recordings in a simple, efficient manner.
Top Page Image Contents