Tascam D00871320A, DP-01FX/CD Metronome, When INT is selected at Output internal metronome

Page 37

Advanced techniques

Point editing Even when the screen shows positions in bars and beats, location points are edited in minutes and seconds (“To edit a location mark” on page 29), except that the bars and beats equivalent is also shown.

When the LOCATE key is held down in “bars and beats” mode, the dis- play looks something like this:

Selecting a point to edit shows the bars and beats below the absolute time value. The bars and beats cannot be set directly, but change, together with the absolute time value, as the jog wheel is turned:

IN, OUT and TO points do not show the bars/beats value when being

edited.

Metronome

To help you keep in time, the DP-01 provides an internal metronome function and a MIDI metronome function. The internal metronome function allows you to listen to the metronome on the DP-01, while the MIDI metronome function generates a metronome output on the MIDI interface.

1Press MENU, use the DATA dial to select the MIDI menu, and press the cursor key.

2 Select the METRONOME item, and press the cursor key.

When "INT" is selected at "Output" [internal metronome]

The DP's internal metronome (not an external sound source) can be out put to headphones and LINE OUTPUT L/R.

Mode Select from RecOnly (only at recording) and Rec&Play (at recording and playback).

IntLvl Set the output level of the metronome within the range 0 to 127. (The output level cannot be adjusted on the MASTER fader.)

When "MIDI" is selected at "Output" [MIDI metronome]

This setting generates a metronome output via the MIDI interface. Gener ally, percussion type sounds are used as the metronome. Any sound, of course, can be produced.

The internal metro- nome is not output

in the following instances:

•While the BOUNCE key is lit

•While the MASTER key is flashing or is lit

Working in bars & beats

TASCAM DP-01 Owner’s Manual 37

Page 36 Page 38
Image 37
Page 36 Page 38
Contents DP-01FX DP-01FX/CD Important Safety Precautions Important Safety Instructions Safety Information Contents DP-01FX Appendix Using the USB connectionCommonly-used functions DP-01FX/CD AppendixTable of Figures Power connections to the DP-01Getting started Starting out with your DP-01This manual Getting started About the power adaptorCopyright DP-01 Line-upStarting up the DP-01 Startup & shutdownHow to play back demo songs Access lightYou can now use the rear panel switch to turn off the DP-01 Startup & shutdownStarting out with your DP-01 Navigation NavigationTitling Shift keyConnecting your DP-01 to other equipment Connecting your DP-01 to other equipmentConnecting your DP-01 to other equipment Rear panel connections Input Mode switchSignals sent from this are the same as those sent from Managing your songs Managing your songsCreating a new song Storing songsErasing a song Loading a saved songSong information Erasing many songs at one timeAdditional song operations Assigning inputs to tracks Assigning inputsRecording RecordingUsing marks to locate positions More advanced featuresPunch recording BouncingMixdown and mastering Mixdown and masteringMastering Location Advanced techniquesDirect location Location marksUse the jog wheel to select a mark and press OUT marksUsing the meters Using the metersPress Cursor key EQ settingsPunching PunchingRehearsal Pre-roll and post-roll times Bouncing BouncingRepeat Setting the repeat intervalSelecting the time mode Tempo settingWorking in bars & beats Working in bars & beatsMetronome When INT is selected at Output internal metronomeMidi Clock, etc Working with MidiPress Menu and scroll down to Midi and press the key Midi timecode Disk management Disk managementSelecting the active partition Formatting a diskFormatting the FAT partition Formatting a partition ReformAutomatic song creation Advanced song management Advanced song managementCopying songs Deleting unused dataProtecting a song Using the USB connection Using the USB connectionDisconnecting from Windows ME / 2000 / XP systems With System requirementsOpen and Close Current song is shown with the ← symbol beside itBacking up and restoring songs Backing upOnce the song archive is on the PC, you can close the DP-01 Restoring a songImporting a track Importing and exporting tracksExporting tracks Audio When all tracks for export have been selected, press EnterFor export Up a titling screenExporting the mastered stereo tracks Default file name for you to editAbout track editing Using edit modeAbout track editing IN, OUT and toYou can change the following values Track editing functionsMove Paste There is only one value that you can change OpenPress the Undo key briefly, to undo the last undoable action There are two values that you can changeAbout track editing Troubleshooting TroubleshootingFiles to the FAT partition for import MessagesYou can’t clone a track to itself. Clone Track on Analog specifications INPUTs a and B SpecificationsDigital specifications Audio performancePhysical characteristics SpecificationsDimensional drawings Stereo MIX L Stereo MIX R Block diagram DP-01Phantom power Tuning a guitarDP-01FX Appendix Balanced XLR inputsNoise reduction Multi-effect Multi-effectAvailable multi-effect settings Setting the effect volumeElectric guitar settings Egtr Acoustic guitar settings Agtr Effect Vocal settings VocalReverb ReverbAbout CD-R and CD-RW discs DP-01FX/CD AppendixHandling of compact discs Media Compatibility Table Media Compatibility TableOpening/Closing CDs Audio CD MenuPlaying back audio CDs Making an audio CD Audio CD MenuWriting by Disk At Once Audio CD Menu Move the arrow usingWriting by Track at Once Erasing Audio CDs Finalizing CDsPress the Enter key to erase the CD-RW Data CD Menu Data CD MenuImporting from a CD Names of any WAV format files on the CD are displayedKeys, and press the Insert key Exporting to CDsTitling on Available space on the Data CD and the total file sizeOr the Data dial. Titling on Backing up songs to a CDIf you insert a written CD-RW instead of a blank CD Restoring songs from a CDErasing data CDs An error occurred in the Backup execution process CD-related Error MessagesMessages MessagesMessages No Disk Insert a CD has not been inserted. Insert a blank CD How do I..? Commonly-used functionsJump to a location mark How do I..?Timecode or Midi clock Trim the in and OUT and to points DP-01FX DP-01FX/CD

D00871320A, DP-01FX/CD specifications

The Tascam DP-01FX/CD is a versatile and user-friendly digital portastudio that perfectly balances professional quality with straightforward operation, making it an exceptional choice for both novice and seasoned musicians. Designed for multitrack recording, this device integrates a wide range of features, enabling users to create high-quality audio projects with ease.

At the heart of the DP-01FX/CD is its capacity to record up to eight tracks simultaneously, with a total of 16 tracks available for mixing. This capability allows for a rich layering of sounds, making it suitable for recording full bands, solo artists, or intricate soundscapes. The onboard effects processor offers 50 different effects types, including reverbs, delays, and modulation effects, giving users a broad palette for sound design and enhancement.

One of the standout features of the DP-01FX/CD is its built-in CD burner, enabling users to easily create audio CDs directly from their recordings. This feature provides convenience for artists looking to distribute their music quickly without needing a separate computer or additional equipment. The device also includes a high-quality dual-XLR mic preamp, ensuring that vocal and instrumental recordings maintain clarity and depth.

Connectivity is another strong point of the DP-01FX/CD, as it incorporates multiple input options, including XLR, TRS, and RCA jacks. This flexibility allows for various instruments and microphones to be plugged in simultaneously, streamlining the recording process. Additionally, the unit supports USB connectivity, enabling users to transfer their projects to and from a computer for further editing or backup.

The user-friendly interface is designed for straightforward navigation, featuring a backlit LCD screen and intuitive controls. This makes it easy for users to adjust levels, apply effects, and manage tracks without getting lost in complicated menus. Moreover, the built-in metronome and tuner further enhance the recording experience, providing musicians with the tools needed to stay in time and in pitch.

In conclusion, the Tascam DP-01FX/CD is an all-in-one solution for musicians and audio producers seeking a blend of functionality and ease of use. Its robust features, professional-grade sound quality, and convenient CD-burning capability make it an excellent choice for those looking to create high-fidelity audio recordings in a simple, efficient manner.
Top Page Image Contents