Tascam D00871320A, DP-01FX/CD owner manual OUT marks, Use the jog wheel to select a mark and press

Page 29

Advanced techniques

To move to a location mark Press and hold the LOCATE key, and briefly press and release the REW or F FWD key to move to the previous or next mark in the song. This works while playing back, while stopped or “winding”, but not while recording.

5Alternatively, press and hold the LOCATE key for about a second to show the location mark list:

Use the jog wheel to choose a mark (they’re listed in the order they

appear in the song) and press ENTER to jump to that mark.

To delete a location mark Stop playback (or recording) and locate to the mark you want to delete (or a little after). Press and hold down the SHIFT key and press the INSERT (DELETE) key.

To edit a location mark If you made a mistake when you entered a location mark, you can change the time of the mark.

1Press and hold the LOCATE key for about a second to show the loca- tion mark list.

2

Use the jog wheel to select a mark and press the

cursor key to select

 

it.

 

You can’t undo this.

This is sometimes called “trimming”.

The marks are shown in the order they appear in the song, not by

number.

3Use the wheel to move the mark backwards and forwards by 1/10 frame (the rightmost digit of the number). You can’t move a mark for- ward past the next mark in the list, or backwards to before the previous mark in the list.

4Press ENTER when done (to return to the home screen) or EXIT (to return to the mark list).

1/10 frame is 1/300 of a second—about

3.3 milliseconds

IN and OUT marks

These marks are used for setting the points at which automated punch recording starts and ends and for repeat playback, as well as for track editing. You can set these marks while playing back, recording, or while playback is stopped.

Set IN and OUT marks by pressing and holding the SHIFT key and pressing IN (SET IN) or OUT (SET OUT) at the appropriate points.

Locate to the IN and OUT points by simply pressing IN and OUT.

Fine-tune the position of the IN and OUT points by pressing and holding SHIFT and pressing TRACK EDIT (POINT EDIT):

Edit the point, to 1/10 frame accuracy, using the cursor keys and the jog wheel, in the same way as for direct location (“Direct location” on page 28).

Press ENTER when done.

IN and OUT marks are also used (along with the TO mark, which is

set and used in the same way) when performing track editing func- tions.

Location

TASCAM DP-01 Owner’s Manual 29

Page 28 Page 30
Image 29
Page 28 Page 30
Contents DP-01FX DP-01FX/CD Important Safety Precautions Important Safety Instructions Safety Information Contents DP-01FX Appendix Using the USB connectionCommonly-used functions DP-01FX/CD AppendixTable of Figures Power connections to the DP-01This manual Starting out with your DP-01Getting started Getting started About the power adaptorCopyright DP-01 Line-upStarting up the DP-01 Startup & shutdownHow to play back demo songs Access lightYou can now use the rear panel switch to turn off the DP-01 Startup & shutdownStarting out with your DP-01 Navigation NavigationTitling Shift keyConnecting your DP-01 to other equipment Connecting your DP-01 to other equipmentConnecting your DP-01 to other equipment Rear panel connections Input Mode switchSignals sent from this are the same as those sent from Managing your songs Managing your songsCreating a new song Storing songsErasing a song Loading a saved songAdditional song operations Erasing many songs at one timeSong information Assigning inputs to tracks Assigning inputsRecording RecordingUsing marks to locate positions More advanced featuresPunch recording BouncingMixdown and mastering Mixdown and masteringMastering Location Advanced techniquesDirect location Location marksUse the jog wheel to select a mark and press OUT marksUsing the meters Using the metersPress Cursor key EQ settingsRehearsal PunchingPunching Pre-roll and post-roll times Bouncing BouncingRepeat Setting the repeat intervalSelecting the time mode Tempo settingWorking in bars & beats Working in bars & beatsMetronome When INT is selected at Output internal metronomePress Menu and scroll down to Midi and press the key Working with MidiMidi Clock, etc Midi timecode Disk management Disk managementSelecting the active partition Formatting a diskAutomatic song creation Formatting a partition ReformFormatting the FAT partition Advanced song management Advanced song managementCopying songs Deleting unused dataProtecting a song Using the USB connection Using the USB connectionDisconnecting from Windows ME / 2000 / XP systems With System requirementsOpen and Close Current song is shown with the ← symbol beside itBacking up and restoring songs Backing upOnce the song archive is on the PC, you can close the DP-01 Restoring a songExporting tracks Importing and exporting tracksImporting a track Audio When all tracks for export have been selected, press EnterFor export Up a titling screenExporting the mastered stereo tracks Default file name for you to editAbout track editing Using edit modeAbout track editing IN, OUT and toYou can change the following values Track editing functionsMove Paste There is only one value that you can change OpenPress the Undo key briefly, to undo the last undoable action There are two values that you can changeAbout track editing Troubleshooting TroubleshootingFiles to the FAT partition for import MessagesYou can’t clone a track to itself. Clone Track on Analog specifications INPUTs a and B SpecificationsDigital specifications Audio performanceDimensional drawings SpecificationsPhysical characteristics Stereo MIX L Stereo MIX R Block diagram DP-01Phantom power Tuning a guitarDP-01FX Appendix Balanced XLR inputsNoise reduction Multi-effect Multi-effectElectric guitar settings Egtr Setting the effect volumeAvailable multi-effect settings Acoustic guitar settings Agtr Effect Vocal settings VocalReverb ReverbHandling of compact discs DP-01FX/CD AppendixAbout CD-R and CD-RW discs Media Compatibility Table Media Compatibility TablePlaying back audio CDs Audio CD MenuOpening/Closing CDs Writing by Disk At Once Audio CD MenuMaking an audio CD Audio CD Menu Move the arrow usingWriting by Track at Once Press the Enter key to erase the CD-RW Finalizing CDsErasing Audio CDs Data CD Menu Data CD MenuImporting from a CD Names of any WAV format files on the CD are displayedKeys, and press the Insert key Exporting to CDsTitling on Available space on the Data CD and the total file sizeOr the Data dial. Titling on Backing up songs to a CDIf you insert a written CD-RW instead of a blank CD Restoring songs from a CDErasing data CDs An error occurred in the Backup execution process CD-related Error MessagesMessages MessagesMessages No Disk Insert a CD has not been inserted. Insert a blank CD How do I..? Commonly-used functionsJump to a location mark How do I..?Timecode or Midi clock Trim the in and OUT and to points DP-01FX DP-01FX/CD

D00871320A, DP-01FX/CD specifications

The Tascam DP-01FX/CD is a versatile and user-friendly digital portastudio that perfectly balances professional quality with straightforward operation, making it an exceptional choice for both novice and seasoned musicians. Designed for multitrack recording, this device integrates a wide range of features, enabling users to create high-quality audio projects with ease.

At the heart of the DP-01FX/CD is its capacity to record up to eight tracks simultaneously, with a total of 16 tracks available for mixing. This capability allows for a rich layering of sounds, making it suitable for recording full bands, solo artists, or intricate soundscapes. The onboard effects processor offers 50 different effects types, including reverbs, delays, and modulation effects, giving users a broad palette for sound design and enhancement.

One of the standout features of the DP-01FX/CD is its built-in CD burner, enabling users to easily create audio CDs directly from their recordings. This feature provides convenience for artists looking to distribute their music quickly without needing a separate computer or additional equipment. The device also includes a high-quality dual-XLR mic preamp, ensuring that vocal and instrumental recordings maintain clarity and depth.

Connectivity is another strong point of the DP-01FX/CD, as it incorporates multiple input options, including XLR, TRS, and RCA jacks. This flexibility allows for various instruments and microphones to be plugged in simultaneously, streamlining the recording process. Additionally, the unit supports USB connectivity, enabling users to transfer their projects to and from a computer for further editing or backup.

The user-friendly interface is designed for straightforward navigation, featuring a backlit LCD screen and intuitive controls. This makes it easy for users to adjust levels, apply effects, and manage tracks without getting lost in complicated menus. Moreover, the built-in metronome and tuner further enhance the recording experience, providing musicians with the tools needed to stay in time and in pitch.

In conclusion, the Tascam DP-01FX/CD is an all-in-one solution for musicians and audio producers seeking a blend of functionality and ease of use. Its robust features, professional-grade sound quality, and convenient CD-burning capability make it an excellent choice for those looking to create high-fidelity audio recordings in a simple, efficient manner.
Top Page Image Contents