Tascam D00871320A, DP-01FX/CD owner manual Mastering

Page 27

Starting out with your DP-01

Mastering

This is where the actual stereo recording takes place, once you’re happy with the mix you’ve created. You create a mixed master ste- reo track, starting at 00:00:00:00 (the “zero point”) and continuing to the OUT point.

The mixed stereo master is stored on disk as part of the song.

Before starting the mastering procedure, you must set the OUT point. This is where the mastering process stops. See “IN and OUT marks” on page 29 for details.

1Press the MASTER key so that it flashes.

2Press and hold the RECORD key and press the PLAY key. Recording starts on the stereo master tracks (RECORD and PLAY are lit).

Make the mix moves (faders, pan, etc.) that you practiced earlier. These mix moves will affect the sound of the final master stereo track.

When the playback point reaches the OUT point, recording stops.

3Press the MASTER key so that it is lit steadily. Now when you press PLAY, you can hear the master stereo mix you have just created. This mix is output through the analog and digital outputs, and you can record it on a stereo recorder.

4If you are happy with the mix, you can then exit the mastering mode by pressing the MASTER key until it is unlit.

If you want to do the mix again, press the MASTER key until it flashes, and re-record. The new mix will overwrite your previous mix.

If a song has had a master stereo mix recorded and saved with it, you can play back this master stereo mix whenever the song is loaded, by pressing the MASTER key until it is lit steadily and then pressing PLAY.

To add the STEREO MIX inputs (through the analog outputs only), you can play back the stereo master mix. Any MIDI synchronization, etc. is output as the stereo master mix is played back so that the output from a sequencer, etc. can be added to the analog outputs, and recorded on a stereo recorder (cassette, CD, MD or computer audio program).

The stereo master mix can be “cloned” to a pair of stereo tracks (see “CLONE TRACK” on page 54).

While the DP-01 is

in the mastering mode, you will notice that a number of playback. functions are not avail- able. If you try to perform these operations, a popup message tells you that you are in mastering mode.

You can hear any

signals received at the STEREO MIX inputs, but they won’t be recorded on the master track.

Note that while the MASTER key is lit steadily, you cannot use the mixer

controls, except for the MASTER fader.

If you want to save a mix from the DP- 01 as a file, you can transfer it via

USB to a computer (see “Exporting the mastered stereo tracks” on page 49).

Mixdown and mastering

TASCAM DP-01 Owner’s Manual 27

Page 26 Page 28
Image 27
Page 26 Page 28
Contents DP-01FX DP-01FX/CD Important Safety Precautions Important Safety Instructions Safety Information Contents DP-01FX Appendix Using the USB connectionCommonly-used functions DP-01FX/CD AppendixTable of Figures Power connections to the DP-01Starting out with your DP-01 Getting startedThis manual DP-01 Line-up About the power adaptorGetting started CopyrightStarting up the DP-01 Startup & shutdownStartup & shutdown Access lightHow to play back demo songs You can now use the rear panel switch to turn off the DP-01Starting out with your DP-01 Navigation NavigationTitling Shift keyConnecting your DP-01 to other equipment Connecting your DP-01 to other equipmentConnecting your DP-01 to other equipment Rear panel connections Input Mode switchSignals sent from this are the same as those sent from Storing songs Managing your songsManaging your songs Creating a new songErasing a song Loading a saved songErasing many songs at one time Song informationAdditional song operations Assigning inputs to tracks Assigning inputsRecording RecordingBouncing More advanced featuresUsing marks to locate positions Punch recordingMixdown and mastering Mixdown and masteringMastering Location marks Advanced techniquesLocation Direct locationUse the jog wheel to select a mark and press OUT marksUsing the meters Using the metersPress Cursor key EQ settingsPunching PunchingRehearsal Pre-roll and post-roll times Bouncing BouncingRepeat Setting the repeat intervalWorking in bars & beats Tempo settingSelecting the time mode Working in bars & beatsMetronome When INT is selected at Output internal metronomeWorking with Midi Midi Clock, etcPress Menu and scroll down to Midi and press the key Midi timecode Formatting a disk Disk managementDisk management Selecting the active partitionFormatting a partition Reform Formatting the FAT partitionAutomatic song creation Deleting unused data Advanced song managementAdvanced song management Copying songsProtecting a song System requirements Using the USB connectionUsing the USB connection Disconnecting from Windows ME / 2000 / XP systems WithBacking up Current song is shown with the ← symbol beside itOpen and Close Backing up and restoring songsOnce the song archive is on the PC, you can close the DP-01 Restoring a songImporting and exporting tracks Importing a trackExporting tracks Up a titling screen When all tracks for export have been selected, press EnterAudio For exportExporting the mastered stereo tracks Default file name for you to editIN, OUT and to Using edit modeAbout track editing About track editingYou can change the following values Track editing functionsMove Paste There is only one value that you can change OpenPress the Undo key briefly, to undo the last undoable action There are two values that you can changeAbout track editing Troubleshooting TroubleshootingFiles to the FAT partition for import MessagesYou can’t clone a track to itself. Clone Track on Audio performance SpecificationsAnalog specifications INPUTs a and B Digital specificationsSpecifications Physical characteristicsDimensional drawings Stereo MIX L Stereo MIX R Block diagram DP-01Balanced XLR inputs Tuning a guitarPhantom power DP-01FX AppendixNoise reduction Multi-effect Multi-effectSetting the effect volume Available multi-effect settingsElectric guitar settings Egtr Acoustic guitar settings Agtr Effect Vocal settings VocalReverb ReverbDP-01FX/CD Appendix About CD-R and CD-RW discsHandling of compact discs Media Compatibility Table Media Compatibility TableAudio CD Menu Opening/Closing CDsPlaying back audio CDs Audio CD Menu Making an audio CDWriting by Disk At Once Audio CD Menu Move the arrow usingWriting by Track at Once Finalizing CDs Erasing Audio CDsPress the Enter key to erase the CD-RW Names of any WAV format files on the CD are displayed Data CD MenuData CD Menu Importing from a CDAvailable space on the Data CD and the total file size Exporting to CDsKeys, and press the Insert key Titling onOr the Data dial. Titling on Backing up songs to a CDIf you insert a written CD-RW instead of a blank CD Restoring songs from a CDErasing data CDs An error occurred in the Backup execution process CD-related Error MessagesMessages MessagesMessages No Disk Insert a CD has not been inserted. Insert a blank CD How do I..? Commonly-used functionsJump to a location mark How do I..?Timecode or Midi clock Trim the in and OUT and to points DP-01FX DP-01FX/CD

D00871320A, DP-01FX/CD specifications

The Tascam DP-01FX/CD is a versatile and user-friendly digital portastudio that perfectly balances professional quality with straightforward operation, making it an exceptional choice for both novice and seasoned musicians. Designed for multitrack recording, this device integrates a wide range of features, enabling users to create high-quality audio projects with ease.

At the heart of the DP-01FX/CD is its capacity to record up to eight tracks simultaneously, with a total of 16 tracks available for mixing. This capability allows for a rich layering of sounds, making it suitable for recording full bands, solo artists, or intricate soundscapes. The onboard effects processor offers 50 different effects types, including reverbs, delays, and modulation effects, giving users a broad palette for sound design and enhancement.

One of the standout features of the DP-01FX/CD is its built-in CD burner, enabling users to easily create audio CDs directly from their recordings. This feature provides convenience for artists looking to distribute their music quickly without needing a separate computer or additional equipment. The device also includes a high-quality dual-XLR mic preamp, ensuring that vocal and instrumental recordings maintain clarity and depth.

Connectivity is another strong point of the DP-01FX/CD, as it incorporates multiple input options, including XLR, TRS, and RCA jacks. This flexibility allows for various instruments and microphones to be plugged in simultaneously, streamlining the recording process. Additionally, the unit supports USB connectivity, enabling users to transfer their projects to and from a computer for further editing or backup.

The user-friendly interface is designed for straightforward navigation, featuring a backlit LCD screen and intuitive controls. This makes it easy for users to adjust levels, apply effects, and manage tracks without getting lost in complicated menus. Moreover, the built-in metronome and tuner further enhance the recording experience, providing musicians with the tools needed to stay in time and in pitch.

In conclusion, the Tascam DP-01FX/CD is an all-in-one solution for musicians and audio producers seeking a blend of functionality and ease of use. Its robust features, professional-grade sound quality, and convenient CD-burning capability make it an excellent choice for those looking to create high-fidelity audio recordings in a simple, efficient manner.
Top Page Image Contents