Samson Graphite 25 owner manual Quick Start

Page 12

Quick Start

1.Connect the Graphite 25 to your computer using the supplied USB cable. The unit will receive power and transmit MIDI data via the USB connection.

2.Connect a ¼”TS pedal to the SUSTAIN pedal input.

Computer

Sustain Pedal

MIDI Device

3.Push the POWER switch to the on position.

4.Launch your DAW or virtual instrument software, and set the Graphite 25 as the MIDI Input and MIDI Output device.

5.To use the Graphite 25 with an external MIDI device (such as a sound module), connect a

5-pin MIDI cable to the MIDI OUT on the rear of the Graphite 25, and to the MIDI IN of the external device. For more information on connecting to an external MIDI device, please see “MIDI OUT” on page 26.

12

Image 12

Contents USB Midi Controller Copyright 2013 Samson Technologies Important Safety Information Page Important Safety Information Contents Introduction Graphite 25 Features System ComponentsMinimum System Requirements Front Panel Controls and Functions Front Panel Controls and Functions Rear Panel Controls and Functions Quick Start Display Features PresetStatus Indicators Button IndicatorsGraphite 25 Modes Remote Control Presets ComputerPreset Mode Graphite PresetRemote Control Presets User PresetsSetup Mode ControllersParameter Controller Data Remark Editing the Aftertouch Control Selecting the Keyboard Velocity CurveAvailable Velocity Curves HardSwitch the Local Control Pedal SetupPreset Reset Selecting Velocity Curve for the Trigger PadsZones Mode Editing ZonesSection of the keyboard Zn Port Transmitting port Zn Ch Performance Mode Performance Mode Parameters Trigger PadsPerformance Controls Transport Buttons Midi OUT Operational Flow Chart Midi Continuous Controller CC List Description TypeNrpn LSB Play MMC Factory Default Settings Controller Type Message ModeOther Factory Settings ZonesMidi Note Numbers OctaveSpecifications Controls