Samson Graphite 25 Editing the Aftertouch Control, Selecting the Keyboard Velocity Curve, Hard

Page 18

Setup Mode

Editing the Aftertouch Control

Press the Aftertouch key to assign control code for the keyboard aftertouch feature. “A.Touch” will appear on the display with the value of the current control in the data area. Use the DATA +/– buttons to change the value, or enter data by pressing the numerical keys on the keyboard. Press both DATA +/– buttons simultaneously to recover the original value. Press the ENTER key or the ENTER button to confirm your setting and to save. When you save your settings, the value display will stop blinking.

Selecting the Keyboard Velocity Curve

Press the KB Vel key to select a velocity curve for keyboard. “KB.Curve” will appear in the Operation area of the display with its current velocity curve number in the data area. The Operation area will then change to show the current velocity curve. Use the DATA +/– buttons or enter the number by pressing the numerical keys on the keyboard to select a curve. Press the ENTER key or the ENTER button to confirm your setting and to save. When you save your settings, the name of the velocity curve will be updated, and the value display will stop blinking.

Available Velocity Curves

No.

Type

Description

 

 

 

0

Normal

Linear type curve - Default

 

 

 

1

Soft 1

Results in a lower transmitted velocity (and corresponding volume)

 

 

 

2

Soft 2

Results in a lower transmitted velocity (and corresponding volume)

 

 

 

3

Hard 1

Results in a higher transmitted velocity (and corresponding volume)

 

 

 

4

Hard 2

Results in a higher transmitted velocity (and corresponding volume)

 

 

 

5

Expand

Emphasizing the louder volume and softening the lower volume

 

 

 

6

Compress

Emphasizing the softer volume and softening the louder volume

 

 

 

7

Fix 64

Note velocity is fixed to 64

 

 

 

8

Fix 100

Note velocity is fixed to 100

 

 

 

9

Fix 127

Note velocity is fixed to 127

 

 

 

0 - Normal

1 - Soft 1

2 - Soft 2

3 - Hard 1

4 - Hard 2

5 - Expand

6 - Compress

7 - Fix 64

8 - Fix 100

9 - Fix 127

18

Image 18
Contents USB Midi Controller Copyright 2013 Samson Technologies Important Safety Information Page Important Safety Information Contents Introduction Graphite 25 Features System ComponentsMinimum System Requirements Front Panel Controls and Functions Front Panel Controls and Functions Rear Panel Controls and Functions Quick Start Status Indicators Display FeaturesPreset Button IndicatorsGraphite 25 Modes Remote Control Presets ComputerRemote Control Presets Preset ModeGraphite Preset User PresetsSetup Mode ControllersParameter Controller Data Remark Available Velocity Curves Editing the Aftertouch ControlSelecting the Keyboard Velocity Curve HardPreset Reset Switch the Local ControlPedal Setup Selecting Velocity Curve for the Trigger PadsZones Mode Editing ZonesSection of the keyboard Zn Port Transmitting port Zn Ch Performance Mode Performance Mode Parameters Trigger PadsPerformance Controls Transport Buttons Midi OUT Operational Flow Chart Midi Continuous Controller CC List Description TypeNrpn LSB Play MMC Factory Default Settings Controller Type Message ModeOther Factory Settings ZonesMidi Note Numbers OctaveSpecifications Controls