Samson Graphite 25 owner manual Performance Mode Parameters, Trigger Pads

Page 23

Graphite 25 · USB/MIDI Keyboard Controller

Performance Mode Parameters

Trigger Pads

The keyboard features four assignable velocity-sensitive trigger pads with aftertouch. The factory setting for the trigger pads is to function as drum pads. When you strike a pad, a cor- responding icon will appear, and its note MIDI message will be transmitted on channel 10. The pad number and the velocity curve number will be shown in the Operation and Data area of the display and the port, channel, pad type, pad mode and note number information will be shown under their respective tags. When you continuously press a pad, it will send a channel aftertouch message, depending on how hard it is pressed.

The pads are configured to two pad banks with different settings for each pad, for a total of eight individual pads. Press the PAD A/B button to switch between the two banks. The active bank will be shown on the display. The factory default settings for pads are listed in the “Facto- ry Default Settings” on page 31. You can select the pad velocity curve, change parameters,

or assign other controls to pads in Setup Mode.

Setting the Channel, Program, MSB, LSB and Port for the Keyboard

Some parameters can be edited from Performance Mode. Press the PAGE / buttons to cycle through the parameters. Use the DATA +/– buttons to edit data. The edited data in the first row of the display will flash. When you have completed making your changes for all items, press the ENTER button to confirm and transmit them together. To cancel your changes, press the MAIN button. All data will be recovered to its original value.

Please see the table below for details on the adjustable parameters.

Tag

Description

Range

Factory default setting

 

 

 

 

Program

Program number

0–127

0

 

 

 

 

MSB

Most Significant Bit of program bank for keyboard playing

0–127

0

 

 

 

 

LSB

Least Significant Bit of program bank for keyboard playing

0–127

0

 

 

 

 

Port

Transmitting port

1–5

1

 

 

 

 

Ch

Transmitting channel

1–16

1

 

 

 

 

23

Image 23
Contents USB Midi Controller Copyright 2013 Samson Technologies Important Safety Information Page Important Safety Information Contents Introduction Minimum System Requirements Graphite 25 FeaturesSystem Components Front Panel Controls and Functions Front Panel Controls and Functions Rear Panel Controls and Functions Quick Start Button Indicators Display FeaturesPreset Status IndicatorsGraphite 25 Modes Computer Remote Control PresetsUser Presets Preset ModeGraphite Preset Remote Control PresetsParameter Controller Data Remark Setup ModeControllers Hard Editing the Aftertouch ControlSelecting the Keyboard Velocity Curve Available Velocity CurvesSelecting Velocity Curve for the Trigger Pads Switch the Local ControlPedal Setup Preset ResetEditing Zones Zones ModeSection of the keyboard Zn Port Transmitting port Zn Ch Performance Mode Trigger Pads Performance Mode ParametersPerformance Controls Transport Buttons Midi OUT Operational Flow Chart Description Type Midi Continuous Controller CC ListNrpn LSB Play MMC Controller Type Message Mode Factory Default SettingsZones Other Factory SettingsOctave Midi Note NumbersControls Specifications