Samson owner manual Graphite 25 Modes

Page 14

Graphite 25 Modes

The Graphite 25 has four main operation modes: Performance Mode, Preset Mode, Setup Mode and Zone Mode.

Preset Mode - In this mode, you can access the 30 available presets. A preset stores information on the assignments for the slider, knobs, and buttons. Using presets allows you to quickly load the settings for specific applications without having to reprogram the unit every time. This mode is activated by pressing the PRESET button. Refer to the section “Preset Mode” on page 16 for more details.

Setup Mode - In this mode, you can access and assign all of the features of the Graphite 25. This allows you to customize the settings to match your needs. In addition to the buttons on the top panel, the first 18 keys on the keyboard are also available to access functions and enter numerical data. This mode is activated by pressing the SETUP button. Refer to the section “Setup Mode” on page 17 for details.

Zone Mode - The keyboard can be divided into several zones, sometimes referred to as layers or splits. Each zone has its own active key range, program number, MSB and LSB, and can be set to transmit to different channels and ports. There are three zones available. Refer to the section “Zones Mode” on page 20 for more details.

Performance Mode - In this mode, the 25 velocity-sensitive keys transmit note and velocity infor- mation via the USB or MIDI output. The assignable controllers, pitch bend and modulation wheels all transmit continuous controller information. This mode is activated by pressing the MAIN but- ton. Refer to the section “Performance Mode” on page 22 for details.

14

Page 13 Page 15
Image 14
Page 13 Page 15
Contents USB Midi Controller Copyright 2013 Samson Technologies Important Safety Information Page Important Safety Information Contents Introduction Minimum System Requirements Graphite 25 FeaturesSystem Components Front Panel Controls and Functions Front Panel Controls and Functions Rear Panel Controls and Functions Quick Start Status Indicators Display FeaturesPreset Button IndicatorsGraphite 25 Modes Remote Control Presets ComputerRemote Control Presets Preset ModeGraphite Preset User PresetsParameter Controller Data Remark Setup ModeControllers Available Velocity Curves Editing the Aftertouch ControlSelecting the Keyboard Velocity Curve HardPreset Reset Switch the Local ControlPedal Setup Selecting Velocity Curve for the Trigger PadsZones Mode Editing ZonesSection of the keyboard Zn Port Transmitting port Zn Ch Performance Mode Performance Mode Parameters Trigger PadsPerformance Controls Transport Buttons Midi OUT Operational Flow Chart Midi Continuous Controller CC List Description TypeNrpn LSB Play MMC Factory Default Settings Controller Type Message ModeOther Factory Settings ZonesMidi Note Numbers OctaveSpecifications Controls
Top Page Image Contents