Samson Graphite 25 owner manual Introduction

Page 7

Graphite 25 · USB/MIDI Keyboard Controller

Introduction

Thank you for purchasing the Samson Graphite 25, 25-key USB keyboard control- ler! The Graphite 25 gives you all the performance and production control to easily integrate with your Windows or Mac digital production workstation. To capture the dynamics of your performance, the Graphite 25 comes equipped with a 25-key velocity-sensitive keyboard with aftertouch. In addition, the Graphite 25 has four velocity-sensitive trigger pads with aftertouch, that can be used for recording drum beats, triggering samples, or controlling midi parameters.

The Graphite 25 also functions as a full-featured control surface with eight encoders, four function buttons, one master slider, 16 function buttons, and transport controls. At the center of the keyboard, a large backlit LCD screen displays functions and acces- sible parameters in real-time, allowing you to make changes quickly without interrupt- ing your performance or session.

The Graphite 25 is the perfect addition to your DAW or controlling virtual instrument software. To get you started making music immediately, we have included Native Instruments Komplete Elements, which contains over 1000 sounds and effects.

In these pages, you’ll find a detailed description of the features of the Graphite 25 keyboard controller, as well as a guided tour of its control panel, and ­instructions­ for setup and use. You’ll also find a warranty card enclosed. Please don’t forget to fill it out and mail it in so that you can receive online technical support, and so that we can send you updated information about these and other Samson products in the future.

We recommend you record your serial number in the space provided below, for future reference.

Serial number: ____________________________________________

Date of purchase: __________________________________________

With proper care and maintenance, your Graphite 25 will operate trouble-free for many years. Should your keyboard ever require servicing, a Return Authorization (RA) number must be obtained before shipping your unit to Samson. Without this number, the unit will not be accepted. Please call Samson at 1-800-3SAMSON (1-800-372- 6766) for an RA number prior to shipping your unit. Please retain the original packing materials and, if possible, return the unit in its original carton. If your Graphite 25 was purchased outside of the United States, contact your local distributor for warranty details and service information.

Also, be sure to check out our website (www.samsontech.com) for Graphite desktop editing software, firmware updates, and remote control setup documentation.

7

Image 7
Contents USB Midi Controller Copyright 2013 Samson Technologies Important Safety Information Page Important Safety Information Contents Introduction System Components Graphite 25 FeaturesMinimum System Requirements Front Panel Controls and Functions Front Panel Controls and Functions Rear Panel Controls and Functions Quick Start Button Indicators Display FeaturesPreset Status IndicatorsGraphite 25 Modes Computer Remote Control PresetsUser Presets Preset ModeGraphite Preset Remote Control PresetsControllers Setup ModeParameter Controller Data Remark Hard Editing the Aftertouch ControlSelecting the Keyboard Velocity Curve Available Velocity CurvesSelecting Velocity Curve for the Trigger Pads Switch the Local ControlPedal Setup Preset ResetEditing Zones Zones ModeSection of the keyboard Zn Port Transmitting port Zn Ch Performance Mode Trigger Pads Performance Mode ParametersPerformance Controls Transport Buttons Midi OUT Operational Flow Chart Description Type Midi Continuous Controller CC ListNrpn LSB Play MMC Controller Type Message Mode Factory Default SettingsZones Other Factory SettingsOctave Midi Note NumbersControls Specifications