Panasonic AG-MX70 manual Power supply and backup, Setting panel screen, 00E, 3015

Page 20

Power supply and backup

The operation panel settings are stored in the memory when the power is turned off.

The default settings are established when the power is turned back on by selecting [Power] > [Reset] on the [Setup] initial setting screen, and the system is started from the settings which were established at the completion of the previous session by selecting [Power] > [Preset]. If [Demo] has been selected on the [Setup] panel, the demonstration mode is established when the power is turned on.

Select [Reset] or [Preset] on the [Setup] panel from the demonstration mode to restart the system. The demonstration mode can be exited using [Enter].

The panel settings, setup settings and their files, key learn settings and event memory data are saved. These settings and data are backed up by the flash memory even when the power is turned off.

Setting panel screen

The unit’s various functions are adjusted on the setting panel screen. This screen is basically configured as follows.

≥Displayed at the top level of the screen are the joystick XY and rotary Z values and the audio meter.

≥Displayed at the second level of the screen from the top are the event number, transition time, pattern number and internal video setting.

≥Displayed at the third level of the screen from the top are the title of the menu on the display and the item setting ranges.

≥The settings are displayed from the center down. The settings of four items are displayed per page. If there are more than four item settings, they can be scrolled and displayed using the rotary 1 or 2 control. Two lines are allocated to each item, and 7 or so alphanumerics are displayed per item. In some cases, abbreviations are used for the displays.

≥The display of selected setting item is highlighted in reverse video.

≥Selected setting items are returned to their default settings using [Shift] + [.].

[INTVideo] internal video setting screen

Wash Pb 128 Pr 128

Y 128

Event

ME Time

Pattern

 

INT

00E

10:00F

3015

Blue

INT Video

 

 

 

Grade Pos 80

 

 

 

 

 

 

 

Back

Color

Level

 

Pattern

 

Grade

Matte

White

 

255

 

H1

0

 

 

 

 

 

 

 

Color

 

 

 

 

 

 

Bar

 

 

 

 

 

 

 

 

 

 

 

 

 

Memory

Page

Frame

 

 

 

Mode

 

1

 

1F

Field

Write

 

 

 

 

 

 

 

R1

R2

R3

 

R4

 

R5

Wht

Yelw

Cyan

Gren

Mgt

Red

Blue

Blk

Cst1

Cst2

CL Br

St 1-30 Mv 1-30

The internal video settings are performed on this screen.

This menu is selected when the INTVideo button below the LCD display is pressed. It is not selected using INT at a crosspoint. While these settings are performed, the color setting mode is established for joystick XYZ and rotary Z control. The color set appears at the top right.

Setting items

[Back Matte], [Color Bar] and [Memory] are selected using the rotary 1 control.

20

Page 19 Page 21
Image 20
Page 19 Page 21
Contents AG- P FCC Note Overview Contents Specifications About this softwareOverview of MX-Navi Processing of image data Before useParts and their functions REV reverse button ONE WAY buttonMIX button LUM luminance key buttonPreset bus selector button Preset bus / Still execution buttonPreset bus / Strobe execution button Preset bus / Video Effects execution ButtonItem, parameter setting area Setting page display areaJoystick, Z parameter display area Audio level meterSET UP initial setting page display button INT Video internal video setting Display buttonAudio Effects audio effect setting Display button Audio Effects on audio effect Execution buttonPhone headphone volume control Time time setting rotary controlPattern transition/key pattern number Setting button ME ME transition/key transition time setting button1SHIFT key 9B/PRESET / Source 4/8 selector button Preset / Source 1/5 selector buttonPreset / Source 2/6 selector button Preset / Source 3/7 selector button1SOURCE 1/5 fader 4SOURCE 4/8 fader Source 2/6 faderSource 3/7 fader AUX 1 faderExternal key input connector MIC input connectorExternal input Y connector External input PB connector= ? Analog audio 3 input connectors Editor interface connector 9-pinTally output connector RS-422A/RS-232C selector switchExternal interfaces ≥ Functions that can be controlled from the AG-A850≥ Connections ≥ Connection of conversion cableExample 2 Live application System DiagramExample 1 Live application CD player, etc PC with MX-Navi already installed Example 3 Editing applicationVideo camera Editing controllerPower supply and backup Setting panel screenINTVideo internal video setting screen 00EWhen Back Matte has been selected When Custom1, 2 has been selectedBack Color Level Pattern Grade Matte White 255 Black Color Set Pattern Matte Custom1 BackMWhen Memory has been selected When Frame =Memory Frame Mode When FrameColor Effect Gain 128 Color Effects setting screen00 E 1000 F 3015 Video Effects setting screen 1000FPos 128 Channel display Scrolled displayMosaic setting Defocus settingMono monochrome setting Mosaic Size Off Defocus LevelTime Effects still/strobe setting Time Screen Effects Still Field 10FDecay setting Paint settingNega negative setting Mirror setting Decay Time Off Paint Level Nega3D setting Video Effects setting screen Preset program transmission Execution of EffectsAB transition DSK key1000 F 0013 Wht Effect-by-effect setting screensTransition wipe pattern settings Pattern Edge setting Pattern Width Color Edge Hard WhiteEffects setting Effects Light OffEffects Light Shadow Effects Time Light Trail SelfChroma Key setting Key setting Pos 128 19600E 1000F 3101 Wht Key Slice Slope Level 128 255Color cancel setting Crop setting Color Offset Slice Area Mono L CancelBorder setting Crop00E 1000F 3102 Wht Luminance Key and EXT Key external key settingsKey setting Pos 128 00E 1000F 9501 Title Key settingKey setting Basic Pattern Key setting numbers 3001 to 00E 1000F 3002Other key settings numbers 3301 and up 1000F 3301 Wht3Dmodify setting Effect-by-effect setting screens Key Learn setting Empty Modify 9000 Setup00 E 1000 F 3013 Frame Level Copy 255 Paste Rotate Time TransF Exit 128With flag #6002 Insert Replace Flag Frame Level Copy 255 Paste Width Angle Time Amp Exit 192With accordion #6003 Insert Replace Frame Level Copy 255 Paste Width Angle Amp Exit 192Pattern number selected Processing after cancel operation 00E 1000F DSK/Fade settingsDSK Source settings DSK On/Off setting DSK Key settingsCrop setting Fade settings Fade Audio Phone Black After White Off Pre BlueAudio Effects settings PAN setting00E 1000F Wht BalanceEQ equalizer setting EQ Mid equalizer midrange settingVoice Change voice changer setting Mute settingWash Ph 128 Pr 196 Setup initial setting screen1000F 3015 Wht Power power on setting Direct Pattern setting00 E 1000 F 3015 Wht 00 E 1000 F WhtExample of transition Pos 128 196 Example of key pattern Pos 128 Y 196Audio Video Input settings Factory settings Audio Input Video Setup Default LinkSetting method 3015 WhtVideo Format setting Memory settingGen Lock external synchronization setting Bus setting System1 settingSystem2 setting Audio Level setting File settingOther settings Setting methodRecall method Clearing eventsNumber key priorities Correlation between number key settings and Pattern buttonTransition time selection Transition patterns Pair100 101 102 DVE CUT SAT MIX 1301 1302 1303 1304 1305 1306 1307 1308 139 140 MIX 3D DVE Key patterns LUM3305 Exp 3315 4701 4702 4703 4704 4705 4706 4707 4708 4730 4731 4732 4733 4769 4770 4771 4772 4773 +Diss 4789 4790 4791 4792 4793 10 T-11 T-12 28 T-29 T-3014 T-15 17 T-18 T-19 22 T-23 T-24 9711 9721 9731About this software Overview of MX-NaviUSB driver MX-NaviProcessing of image data Management of the image memory ≥ Memory capacityInstallation of the USB driver Before useAG-MX70 connections For Windows 98 and Windows 2000 NotesFor Windows XP Note Installation of MX-Navi Operation confirmationStartup and shutdown Screen descriptionsIcon 9NAME/COMMENT Edit menu Menu descriptionsFile menu View menu Cursor menuHelp menu Operation menuTool menu Setting the Title data playback properties Title data operationsFlow until Title data playback Registering Title data in the transmission list≥ Effect Clearing Title data Manual transmission and playback of Title dataAutomatic transmission and playback of Title data Checking the Title data image Reordering the transmission listSaving the transmission list Opening a transmission listChecking the memory status of the AG-MX70 Changing the AG-MX-70 memory settingsOther operations Transmission and playback of IntVideo data Clearing IntVideo dataSaving data Recalling eventsSetting the initial properties Still DurationMovie Duration Roll SpeedSetting the operating environment Boot and shutdownMemory management File ManagementList of short-cut keys Left arrowDown arrow Open the properties of the selected dataBefore calling for service Problem What to check≥Update the video card driver to the newest version Specifications GeneralVideo INPUT/OUTPUT Accessories Installation of the AG-YA70 Installation of the AG-VE70 AG-VE70Panasonic Broadcast & Television Systems Company
Related manuals
Manual 6 pages 29.07 Kb
Top Page Image Contents