Panasonic AG-MX70 Execution of Effects, AB transition, Preset program transmission, DSK key, Fade

Page 30

Execution of Effects

AB transition

1) Preparation

Slide the transition lever to the A side.

2) Input selection and preview

Select the input source of the transition destination using the B bus cross point button.

The preview selection can now be set as ME and the images of the transition destination can be previewed at the Preview connector.

3) Pattern selection

Select the pattern using the direct transition button or using the number keys. Patterns with numbers 2999 or lower are transition patterns.

Perform the border, shadow, trail and other settings on the LCD setting screen.

The separate border, trail and other settings are stored in each direct button and read out.

4) Execution

Slide the transition lever to the opposite side or set the ME transition time, and then press the Auto Take button.

To execute a transition from B to A, set the A bus input in step 2) and follow the same procedure.

Preset program transmission

1) Preparation

When the transition lever is slid all the way to one end, the cross point button setting is switched over by Prog/Preset.

2)Input selection and preview Same as for AB transition.

3)Pattern selection

Same as for AB transition.

4) Execution

Same as for AB transition.

The transition can be executed by repeating steps 2), 3) and 4).

Key

1) Preparation

Slide the transition lever to the A side. The A bus now becomes the background.

2) Input selection and preview

Select the input source to be inlaid using the B bus cross point button.

The preview selection can now be set as ME and the keyed images can be previewed at the Preview connector. In the case of chroma keys, the colors are selected using the cursor on the preview screen.

3) Pattern selection

Select the pattern using the direct transition button or using the number keys. Patterns with numbers 3000 and up are key patterns.

Perform the border, shadow, trail and other settings on the LCD setting screen.

The separate border, trail and other settings are stored in each direct button and read out.

4) Key adjustment

Adjust the slice, slope and other settings on the LCD setting screen.

5) Execution

Slide the transition lever to the B side or set the ME transition time and press the Auto Take button.

DSK key

1) Preparation

Check that the DSK button’s lamp is neither lighted nor flashing. If it is lighted or flashing, it means that the DSK ON status is already established so press the DSK button to turn off the lamp.

2) Setting

Select the input source of the transition destination using the Preset bus cross point button.

The preview selection can now be set as ME and the images of the transition destination can be previewed at the Preview connector.

3) Execution

Press the DSK/Fade button and perform the DSK/Fade settings.

Select the DSK source, and perform the slice and slope settings.

Set the DSK transition time.

When the button is pressed again, the transition is executed until the DSK ON status. To set DSK to OFF, press the DSK button to turn off its lamp.

Fade

1) Preparation

Perform the fade destination color and audio fade settings using the DSK/Fade settings.

2) Execution

Press the FADE button. When its lamp flashes, the fade- out status is established. For fade-in, press the FADE button to turn off its lamp.

30

Page 29 Page 31
Image 30
Page 29 Page 31
Contents AG- P FCC Note Overview Contents Overview of MX-Navi Processing of image data SpecificationsAbout this software Before useParts and their functions MIX button REV reverse buttonONE WAY button LUM luminance key buttonPreset bus / Strobe execution button Preset bus selector buttonPreset bus / Still execution button Preset bus / Video Effects execution ButtonJoystick, Z parameter display area Item, parameter setting areaSetting page display area Audio level meterAudio Effects audio effect setting Display button SET UP initial setting page display buttonINT Video internal video setting Display button Audio Effects on audio effect Execution buttonPattern transition/key pattern number Setting button Phone headphone volume controlTime time setting rotary control ME ME transition/key transition time setting buttonPreset / Source 2/6 selector button 1SHIFT key 9B/PRESET / Source 4/8 selector buttonPreset / Source 1/5 selector button Preset / Source 3/7 selector buttonSource 3/7 fader 1SOURCE 1/5 fader 4SOURCE 4/8 faderSource 2/6 fader AUX 1 faderExternal input Y connector External key input connectorMIC input connector External input PB connector= ? Tally output connector Analog audio 3 input connectorsEditor interface connector 9-pin RS-422A/RS-232C selector switch≥ Connections External interfaces≥ Functions that can be controlled from the AG-A850 ≥ Connection of conversion cableSystem Diagram Example 1 Live applicationExample 2 Live application Video camera CD player, etc PC with MX-Navi already installedExample 3 Editing application Editing controllerINTVideo internal video setting screen Power supply and backupSetting panel screen 00EBack Color Level Pattern Grade Matte White 255 When Back Matte has been selectedWhen Custom1, 2 has been selected Black Color Set Pattern Matte Custom1 BackMMemory Frame Mode When Memory has been selectedWhen Frame = When FrameColor Effects setting screen 00 E 1000 F 3015Color Effect Gain 128 Pos 128 Video Effects setting screen1000F Channel display Scrolled displayMono monochrome setting Mosaic settingDefocus setting Mosaic Size Off Defocus LevelTime Effects still/strobe setting Time Screen Effects Still Field 10FNega negative setting Decay settingPaint setting Mirror setting Decay Time Off Paint Level Nega3D setting Video Effects setting screen AB transition Preset program transmissionExecution of Effects DSK keyEffect-by-effect setting screens Transition wipe pattern settings1000 F 0013 Wht Pattern Edge setting Pattern Width Color Edge Hard WhiteEffects Light Shadow Effects settingEffects Light Off Effects Time Light Trail Self00E 1000F 3101 Wht Chroma Key settingKey setting Pos 128 196 Key Slice Slope Level 128 255Border setting Color cancel settingCrop setting Color Offset Slice Area Mono L Cancel CropLuminance Key and EXT Key external key settings Key setting Pos 12800E 1000F 3102 Wht Title Key setting Key setting00E 1000F 9501 Basic Pattern Key setting numbers 3001 to 00E 1000F 3002Other key settings numbers 3301 and up 1000F 3301 Wht3Dmodify setting Effect-by-effect setting screens Key Learn setting Empty Modify 9000 Setup00 E 1000 F 3013 Frame Level Copy 255 Paste Rotate Time TransF Exit 128With accordion #6003 Insert Replace With flag #6002 Insert Replace FlagFrame Level Copy 255 Paste Width Angle Time Amp Exit 192 Frame Level Copy 255 Paste Width Angle Amp Exit 192Pattern number selected Processing after cancel operation DSK/Fade settings DSK Source settings00E 1000F DSK Key settings Crop settingDSK On/Off setting Fade settings Fade Audio Phone Black After White Off Pre Blue00E 1000F Wht Audio Effects settingsPAN setting BalanceVoice Change voice changer setting EQ equalizer settingEQ Mid equalizer midrange setting Mute settingSetup initial setting screen 1000F 3015 WhtWash Ph 128 Pr 196 Power power on setting Direct Pattern settingExample of transition Pos 128 196 00 E 1000 F 3015 Wht00 E 1000 F Wht Example of key pattern Pos 128 Y 196Setting method Audio Video Input settingsFactory settings Audio Input Video Setup Default Link 3015 WhtMemory setting Gen Lock external synchronization settingVideo Format setting System1 setting System2 settingBus setting Audio Level setting File settingRecall method Other settingsSetting method Clearing eventsCorrelation between number key settings and Pattern button Transition time selectionNumber key priorities Transition patterns Pair100 101 102 DVE CUT SAT MIX 1301 1302 1303 1304 1305 1306 1307 1308 139 140 MIX 3D DVE Key patterns LUM3305 Exp 3315 4701 4702 4703 4704 4705 4706 4707 4708 4730 4731 4732 4733 4769 4770 4771 4772 4773 +Diss 4789 4790 4791 4792 4793 10 T-11 T-12 28 T-29 T-3014 T-15 17 T-18 T-19 22 T-23 T-24 9711 9721 9731USB driver About this softwareOverview of MX-Navi MX-NaviProcessing of image data Management of the image memory ≥ Memory capacityAG-MX70 connections Installation of the USB driverBefore use For Windows 98 and Windows 2000 NotesFor Windows XP Note Installation of MX-Navi Operation confirmationStartup and shutdown Screen descriptionsIcon 9NAME/COMMENT Menu descriptions File menuEdit menu View menu Cursor menuOperation menu Tool menuHelp menu Flow until Title data playback Setting the Title data playback propertiesTitle data operations Registering Title data in the transmission list≥ Effect Manual transmission and playback of Title data Automatic transmission and playback of Title dataClearing Title data Saving the transmission list Checking the Title data imageReordering the transmission list Opening a transmission listChanging the AG-MX-70 memory settings Other operationsChecking the memory status of the AG-MX70 Saving data Transmission and playback of IntVideo dataClearing IntVideo data Recalling eventsMovie Duration Setting the initial propertiesStill Duration Roll SpeedMemory management Setting the operating environmentBoot and shutdown File ManagementDown arrow List of short-cut keysLeft arrow Open the properties of the selected dataBefore calling for service Problem What to check≥Update the video card driver to the newest version Specifications GeneralVideo INPUT/OUTPUT Accessories Installation of the AG-YA70 Installation of the AG-VE70 AG-VE70Panasonic Broadcast & Television Systems Company
Related manuals
Manual 6 pages 29.07 Kb
Top Page Image Contents