Panasonic AG-MX70 manual 00 E 1000 F 3015 Wht, 00 E 1000 F Wht, Example of transition Pos 128 196

[Setup] initial setting screen

The LCD display now shows the setting screens for each effect pattern. Proceed to set the edges and effects, and if the settings are acceptable, enter them using [Enter], and return to the direct pattern settings.

Example of transition

Pos. X	128	Y	128
Z	196
Event		ME Time			Pattern			INT
00E		10:00F			3015		Wht
Direct Pattern Setup
Transition				Enter to EXIT
Modify
		Comp			Off
Pattern				Width		Color
Edge		Hard			0	White
Effects
			Off
R1		R2		R3		R4			R5

If the setting operation is exited part of the way through (by pressing other buttons, etc.), the settings performed so far will not be stored in the memory.

The settings of six key patterns and seven transitions patterns are stored in the memory. The edges and effects of each of the patterns are also stored.

Example of key pattern

Pos. X	128 Y		128
Z	196
Event		ME Time			Pattern				INT
00E 10:00F 3002							Wht
Direct Pattern Setup
Key				Enter to EXIT
Pattern				Width		Color		K Level
Edge		Hard			0	White		255
Crop		A		A		8		7
			6		2	12		12
Effects								Light
			Off								On
3D		Rotate		Amp		Time		TransF
Modify			0		16	16		32
R1		R2		R3		R4				R5

Key patterns 3xxx, 4xxx and 5xxx as well as key learn patterns 9000 to 9019 can be assigned to key patterns. Transition patterns 0xxx, 1xxx and 2xxx can be assigned to transitions.

The factory settings are the patterns displayed.

53