Panasonic AG-MX70 manual Effects setting, Effects Light Off, Effects Light Shadow

Effect-by-effect setting screens

[Effects] setting

This is used to perform the DVE settings.

Select the [Off], [Shadow] or [Trail] effect using the rotary 2 control.

Set the [Light] (lighting) using the rotary 5 control. This is valid only when the 3D optional board (AG-VE70) has been installed for use.

≥When [Shadow] has been set

When [Shadow] has been selected, the shadow position can be set by setting the position while holding down [Shift].

In this case, the center, scene grabber and hold buttons flash temporarily.

≥When [Trail] has been set

Set the trail color and spark using the rotary 3 control. Select the [Self] original image, [Self-spark], [BodM] border color or [BodM-spark] border spark.

The time can be set to any value from 1 to 32 using the rotary 4 control.

When trail has been set, the trail offset position can be set by setting the position while holding down [Shift]. In this case, the center, scene grabber and hold buttons flash temporarily. Whichever trail or shadow effect was selected last among trail and shadow for DSK, and multi strobe and decay for A/B videoEffects takes effect, and the previous effect is canceled.

<Note>

R1	R2	R3		R4	R5
Effects					Light
	Off				On
	Off				Lights
	Shadow				when 3D
	Trail				board has
					been
					installed.
R1	R2	R3		R4	R5
Effects					Light
	Shadow				On
					Lights
					when 3D
					board has
					been
					installed.
R1	R2	R3		R4	R5
Effects				Time	Light
	Trail	Self	16		On
		Self	1 - 32	Lights
		Self-spark			when 3D
					board has
		BodM
					been
		BodM-spark
					installed.

Only one of three settings—namely, soft, border or soft border—for both multi strobe and pattern edges can be selected when a special pattern has been selected. For further details, refer to the note on page 26.

33