Effect-by-effect setting screens
[Color cancel] setting
This is used to perform the settings for color cancel.
The offset from the [Offset] key can be set to any value from 0 to 255 using the rotary 2 control.
The [C Slice] (cancel slice) can be set to any value from 0 to 255 using the rotary 3 control.
The
The [Mono L] (monochrome level) can be set to any value from 0 to 15 using the rotary 5 control.
[Crop] setting
R1 |
| R2 |
|
|
| R3 |
|
|
| R4 |
|
|
| R5 | |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Color |
| Offset |
|
|
| C Slice |
|
|
|
|
|
|
| Mono L | |
Cancel |
|
| 0 |
|
|
| 0 |
|
|
| 2 |
| 6 |
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| ||
| 0 - 255 |
| 0 - 255 |
| 0 - 3 |
|
| 0 - 15 |
This is used to perform the crop settings for the keys. | R1 |
| R2 |
| R3 |
| R4 |
| R5 | ||||
These settings can be performed separately with [LumKey], |
|
|
|
|
|
|
|
|
|
|
|
|
|
Crop |
| A |
| A | 8 |
| 7 |
| |||||
[EXTKey] and [PatternKey]. |
|
|
|
| |||||||||
| 6 |
| 2 |
| 12 |
| 12 |
| |||||
The top part of the image can be set to any value from 2 to |
|
|
|
|
| ||||||||
|
|
|
|
|
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
| |
230 (NTSC) or to 277 (PAL) using the rotary 2 control. The |
|
| 2 - 230 |
|
| 2 - 230 |
|
| 0 - 680 |
|
| 0 - 680 |
|
default setting is 6. |
|
| (NTSC) |
|
| (NTSC) |
|
|
|
|
|
|
|
The bottom part of the image can be set to any value from 2 |
|
| 2 - 277 |
|
| 2 - 277 |
|
|
|
|
|
|
|
to 230 (NTSC) or to 277 (PAL) using the rotary 3 control. |
|
| (PAL) |
|
| (PAL) |
|
|
|
|
|
|
|
The default setting is 2. |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
The left part of the image can be set to any value from 0 to |
|
|
|
|
|
|
|
|
|
|
|
|
|
680 using the rotary 4 control. |
|
|
|
|
|
|
|
|
|
|
|
|
|
The right part of the image can be set to any value from 0 to 680 using the rotary 5 control. is 12.
If the top setting is changed, the bottom setting will change, and vice versa, in such a way that the total setting will not exceed 230 (NTSC) or 277 (PAL). Similarly, if the left setting is changed, the right setting will change, and vice versa, in such a way that the total setting will not exceed 680. The left and right settings can be changed in
[Border] setting
Select the [Color] (border color) using the rotary 2 control. There are 10 choices: White, Yellow, Cyan, Green, Magenta, Red, Blue, Black, Custom1 and Custom2. The default setting is [White]. Custom1 and Custom2 are colors which have been set by INT Matte.
[Effects] setting
The effects can be added in the same way as with the basic patterns. The default setting is [Off].
[DVE Plus]
This takes effect only when the 3D optional board
It is possible to add the DVEs in key numbers 3401 to 3478, 3601 to 3623, 6001 to 6003, 6006, 6007, and 6009 to 6634. Select [On] or [Off] using the rotary 2 control. The default setting is [Off].
The numbers are input using the rotary 3, 4 and 5 controls. The parameters for patterns with numbers 6001 to 6438 and 6601 to 6716 can be changed with [3D Modify].
35