Panasonic AG-MX70 manual Decay setting, Paint setting, Nega negative setting, Mirror Off

[Video Effects] setting screen

[Decay] setting

The A and B multi strobe, transition, Key, DSK shadow and trail cannot be selected at the same time. Only one of these effects is valid at a time.

Select [On] or [Off] for the effect using the rotary 2 control. Any time setting from 0 to 32 can be selected using the rotary 3 control. The default setting is 16.

This level setting is used for the level of transition number 1066 (219).

[Paint] setting

Select [On] or [Off] for the effect using the rotary 2 control. Any level setting from 0 to 7 can be selected using the rotary 3 control. The default setting is 4.

This level setting is used for the level of transition number 1034 (211).

[Nega] (negative) setting

The Y negative setting and chroma key negative setting can be selected separately using the rotary 2 control and rotary 3 control, respectively. In both cases, the default setting is [Off].

[Mirror] setting

R1	R2	R3		R4	R5
Decay		Time
	Off		16
	On	0 - 32
	Off

R1	R2	R3		R4	R5
Paint		Level
	Off		4
	On	0 - 7
	Off

R1	R2	R3		R4	R5
Nega	Y	C
	Off		Off
	On	On
	Off	Off

The H (horizontal direction) mirror setting and V (vertical direction) mirror setting can be selected separately using the rotary 2 control and rotary 3 control, respectively. In both cases, the default setting is [Off].

<Note>

R1	R2	R3		R4	R5
Mirror	H	V
	Off		Off
	On	On
	Off	Off

Only one of the effects—namely, multi strobe, decay, trail or shadow hardware—effect can be selected. The effect selected last takes precedence, and the previously selected effect is canceled.

27